steering damper

[trx293pv]

Has anyone ever put a precision damper on a lobo frame? what did you have to do to get it to fit? Thanks

[Mony25]

they will fit but it is very tight you have to use the shortest link arm and you will either have to grind the stabalizer mount or the gussets on the front of the frame as the frame is to narrow to fit as is.

[troybilt]

FWIW, I've got a KFX450 Precision Pro on my Laeger Narrow frame, fits no problem.

[trx293pv]

oh. I should have seen that. thanks

[Mony25]

Originally posted by troybilt
FWIW, I've got a KFX450 Precision Pro on my Laeger Narrow frame, fits no problem.

Im pretty sure that is the mount i got on my roll. i believe that was the narrowest mount they make but it still isnt quite enough you will have to grind on the mount or the frame i ground my mount.precision has very good customer service and will help you with whatever you need.

[K-Dub]

I have a Precision Pro on the way for my Lobo. Talked to George at Precision alot the last couple weeks and alot of pics emailed with measurments, we finnaly decided he didnt have a good mount. So off to the machine shop I go. Wish I had access to a CNC machine. But dont, so doing it the old fashined way with just a DRO. Ill post a pic when and if I get it finished. It will be a one of kind.

[Mony25]

im really suprised he didnt recomend the kfx mount its really not that far off. much easier than building one anyway and you cant tell anyhting has been modified. George is a good guy talked to him a lot when i got mine.