PDA

View Full Version : Sprocket size



Stock 400 rider
02-12-2003, 12:17 PM
Hey I'm running the cross country here with my 400 EX completely stock, even the sprockets.(15/38)
I need to know what size is the best for
1- a holeshot/tight courses with low to mid speeds
2-courses with a good final speed, high speed courses.

Thanks a lot!!!

Pappy
02-12-2003, 12:25 PM
id run a 14 tooth front ......and the stock 15 for the more higher end speed courses

Sparks425Ex
02-12-2003, 12:30 PM
Yeah You prolly better bump down to 14 tooth....

02-12-2003, 12:59 PM
Running stock size tires..leave the stock sprockets on there..if ya run 22's out back drop to a 14...at least that's what i do...and while i'm at it..i'll go ahead and move this over to the correct forum...;)

Stock 400 rider
02-12-2003, 01:13 PM
What about the rear sprocket?Don't have to do nothing?Just chnage the front for a 14 th?

toby400ex
02-12-2003, 06:45 PM
yeah, stock for 20 inch rear tires and 14 for 22 inch:o

Stock 400 rider
02-13-2003, 02:38 AM
That's the only thing I hvae to do?
Don't need to do nothing with the rear?
This should be fine cause that's one thing that I don't have to buy

hondaboy400ex
02-14-2003, 08:05 AM
try a 16 tooth for all out top end