how to route clutch cable with curtis sparks header

[yz2stroke]

i put new clutch cable on and its just melting not to sure how to route it because the headers are different then stock

[Nac's22]

I ran mine down under both of them. Just useing a zip tie for now to hold it away from the headers but when I get back from vacation I'm going to make something better for it. Zip tied to the right side motor mount just to hold it tight and away.

[NacsMXer]

If you already burned that clutch cable you can also get a clutch cable for a 92 Honda 250X and run it down the side of the frame. It's longer than stock and completely avoids the headers.

Here's Bigfish's old quad with a Sparks pipe and the 250X cable:

http://www.exriders.com/vbb/attachment.php?s=&postid=2431597