89 harness question!!!

[trx250racer]

what are the extra connections at the stator connector for?
what are those other wires on the right?
the ones with the black connectors?
i have a nice 88 harness that does not have those..
thanks for any help!!!

http://i1085.photobucket.com/albums/j438/TRX250RACER/dec22001.jpg

http://i1085.photobucket.com/albums/j438/TRX250RACER/dec17010.jpg

http://i1085.photobucket.com/albums/j438/TRX250RACER/dec22002.jpg



harness is for sale and last picture shows where the coil connectors have been modified!!

[DnB_racing]

the black connector wires are spare auxiliary wires that can be used for additional low wattage running lights

[trx250racer]

was that exclusive to the 89 only?
thanks.

[deathman53]

all year 250r's had them. remember 85-88 stators are the same. 89 is different, as it has different connectors. I believe 85-88 used all single connectors and in 89 it was changed to igniton coil and pickup to have 2 dual connectors for them and single ones for lighting power. BTW it can power up to a 100w light, just make sure the regulator is connected. 87-89 harnesses are identical, except for the different stator plugs on 89.

[Langbolt]

If you check the 250R wiring Diagram.....the Black wire with the white stripe & green wire are for the Key Switch

:devil:

[DnB_racing]

Originally posted by Langbolt
If you check the 250R wiring Diagram.....the Black wire with the white stripe & green wire are for the Key Switch

:devil: yep your right!!!! i was thinking about the brown / dark green wires at the tail light end!!!!

on the 86 there is only one set for the handlebar switch and on the 87-89 there are two sets one for key and one for handle bar switch