Can u ID these arms?

[skippy1999]

Well I have 4 builds going on over this winter.. and Im getting alittle confused. So I can use some help with the ID on these arms. I need to order ball joints, and a arm bushings. Im thinking the blue ones are houser/Walsh, but the white ones are Laegers, or burgard? and I forget about the red ones?

[skippy1999]

closer

[skippy1999]

white..

[skippy1999]

red..

i have additional pics of all three..

[SilverLake250R]

Blue ones look like Houser.

[rayman375]

Blues are Houser, whites look like Laeger.

[hontrx265r]

houser also installed upside down or wrong side??

[skippy1999]

they could be upside down and reversed.. i need to get the bushings and ball joints prior to mounting them up.. i just put them w the quad.. what about the red ones?

[TLR-Online]

Blue - Houser
White - Laeger
Red - Burgard

[skippy1999]

ok, so now the next question is where is the cheapest place to pick up the bushings and the ball joints for all of these arms..

[TLR-Online]

I like the looks of these ball joints, when mine wear out i will be getting them: http://www.rickystator.com/catalog/product_info.php?cPath=21_25&products_id=41&osCsid=a3ddc32322245c92694d387c37e79508

Burgard is a Site Sponser and have their own forum on here... I would try them for the bushings (They would probably be the cheapest). Im pretty sure the burgard bushings will work on the leagers, not sure on the housers... maybe you can ask them.

Or

There are these:
http://www.atvbushings.com/

Note: What ever bushings you get..I would ask the ID of the Steel Crush Sleeves. 1 Pair of Leager A-Arms i had, the crush sleeves were too small to fit OEM bolts...