PDA

View Full Version : 07 450er revvin problem



hunter61
12-26-2010, 04:22 PM
my 450er is idling and starting fine and you can snap on it and its fine. but when you hold it, it dies! no idea why? could it be jetting?

DnB_racing
12-26-2010, 05:08 PM
is this something that all of a sudden started happening??, if it ran fine before then its not jetting, dirty carb or air filter

hrc450er
12-27-2010, 09:44 AM
throttle sensor ?

hunter61
12-27-2010, 07:28 PM
could it be that sensor i took it out?

hunter61
12-27-2010, 08:36 PM
cant be sensor...... could it be a stuck float or dirty carb???

DnB_racing
12-28-2010, 12:02 AM
Originally posted by DnB_racing
is this something that all of a sudden started happening??, if it ran fine before then its not jetting, dirty carb or air filter is this something that has been happening since you got the quad or did it start after not using for a while!!!!??????

hunter61
12-28-2010, 10:08 AM
well i was at a track and either my shock bolt broke or came out, and shock hit carb and ripped boot. so replaced boot and now is doind this.

DnB_racing
12-28-2010, 10:18 AM
Originally posted by hunter61
well i was at a track and either my shock bolt broke or came out, and shock hit carb and ripped boot. so replaced boot and now is doind this. then you know its not jetting!! is the carb at all damaged??
unless you changed your air box and air boot then it could be jetting, but if you put the same parts back in then jetting shouldnt be an issue!

if you used the same style intake parts then it sounds like you have a air leak
go through your whole intake system and make sure everthing is clean tight and check the underside of the boot to make sure its seated properly

hunter61
12-28-2010, 07:59 PM
checked for lesks no leaks that i can see or find...... i can blurp it rev limiter but wont hold constant throttle.....put same style boot and everything back on it???