plug color

[bklyn400ex]

i just rejetted i pulled out my plug here is a pic is this too lean or is it ok

[Pappy]

looks a lil lean to me:ermm: they tell me it should look like a brown paper bag

[bklyn400ex]

thanx i guess i gotta go up 1 more size grrrrrr its soo cold out and i dont have a garage

[Pappy]

Originally posted by bklyn400ex
thanx i guess i gotta go up 1 more size grrrrrr its soo cold out and i dont have a garage

better to be cold and change plug.....then be cold..pissed off and pushing the quad with a burnt piston home:devil :blah

[bklyn400ex]

i figured out the por15 it went on real nice, i just experimented on my bumper and the quad has been sittin for like a mont i have veerything covered except the bumper because the por15 rep said it is UV sensitive and may fade in the sun, i havent seen any fading at all

[bklyn400ex]

you're right imma rejet i went from a 155 to a 150 the 155 was blackkkkkk what should i put in now?

[Pappy]

yeah i have been using it on real rusty parts for a vintage car place next door to me. it works real good for that. keep us posted:)

[DantheEXman]

you're right imma rejet i went from a 155 to a 150 the 155 was blackkkkkk what should i put in now?

Well if the 155 was black (rich) then I would ask you if you did the plug test correctly, i mean it looks to me that that plug was barley used.. To do a plug test correctly, you have to get it goin down a road at WOT, then pull in the clutch and hit the kill button at the same time and roll home and take a look... This will give you an acurate reaing of the main jet. It is important not to let it idel before you check it, just go from Wide Open Throttle to kill the engine then test it... It should be a tanish brown.. I little black is good also, Rich never hurt an engine, it just lacks performance. And like pappy said, its better to change it now than to have to push it through the snow because you burnt a hole through the piston.

[bklyn400ex]

i rode for like 2 hrs

[bklyn400ex]

where upstate do u live?

[bklyn400ex]

i was by hunter mtn last weekend

[DantheEXman]

I dont believe thats too far but it is up from me.. I live in
Sullivan County.

[DantheEXman]

Get a 152 jet... What kinda gas were ya runnin? That blug looks aweful CLEAN to me. The ceramic sleeve comes white.. So thats why i say it looks clean... It should be black, and the ceramic parts should be tan/brown

[bklyn400ex]

my cousin had a house by kingston there was some really good trails there, where do u ride?