One way clutch replacement

[JRN2786]

My starter clutch is bad. Wondering if anyone has a how to on replacing it?
Also where did you buy the parts and what else should be replaced while doing it? does anyone make a heavy duty starter clutch? Thanks

[DVXracer]

How do you know for sure yours went bad? I think mine went out too, but im not sure how to verify it...

[JRN2786]

I searched the forum and found that people with the same symptoms I have had this problem . Replaced there starter clutch and it fixed it. My starter spins sometimes and doesnt turn the engine over, it always starts but im sure it will quit starting eventually

[DVXracer]

Originally posted by JRN2786
I searched the forum and found that people with the same symptoms I have had this problem . Replaced there starter clutch and it fixed it. My starter spins sometimes and doesnt turn the engine over, it always starts but im sure it will quit starting eventually

Mines doing the same thing, starter spins, but it will only turn the engine over once... its also making a crunching/metal on metal sound, does yours do the same?

[JRN2786]

Yep same thing

[3400ben]

Get your parts from servicehonda.com. They have good prices and ship fast. I believe they only make an oem starter.

[jensenracing77]

to do it right you need a number 3 and number 4. many people just put in a number 5 and get away with it for a while but it will go out faster if that is all you put in it.

http://www.bikebandit.com/houseofmotorcycles/2004-honda-motorcycle-trx400ex-fourtrax-ex-sportrax-ex/o/m2660#sch305463

[JRN2786]

OK thanks. I guess its pretty simple to replace? What kinda flywheel puller do i need?

[togup]

you should buy a sparks key it comes with a flywheel puller ,BAM! you got a puller and a boost in performance.

[JRN2786]

I would but dont know what piston I have or if its stock displacement....