PDA

View Full Version : Graydon proline nerfs



CJM
12-16-2010, 08:44 PM
Came off a 00 400ex, should fit 99-07, not sure about 08 and newer.

Are used and abused, I did polish them a bit for ya tho just to be nice. They come with the mounting hardware (except bolts that go into the pegs themselves) and the 400ex footpegs already drilled. One of the nets where it connects to the bar on one spot could use to be replaced or sewn and I had to fix the one of the mounts where it goes to the footpeg b/c where the bolts go it sheared off. It now has a piece of steel flatbar as a reinforcement which is much stronger. I got them in this shape and they held up ok till I upgraded.

They aint pretty but if you need a cheap set for the buddy or wife quad they should be fine with a bit of work.

40 bucks + ship or dont be afraid to make an offer. Dont forget, your getting the pegs which are worth at least 10 bucks and in good shape.

Ill get some pics up later.

CJM
12-18-2010, 10:18 PM
anyone, open to offers..