300EX Rear Rotor has chunk out of it

[andrewd523]

I have a 2002 300EX that I just bought. I bought it with a 1" chunk out of the rear rotor so I bought a new one to replace it. I cannot find any videos that show how to replace the rear rotor so I was hoping someone on here could help me. Can I just take off the wheel and undo the three bolts to the rotor and slide it off? Or is this a big process?

Any advice would be greatly appreciated.

Thank you in advance.

[dabomb_350x]

You have to remove the brake caliper and the wheel hub also. would loosen up the axle wheel hub nut first along with the three nuts on the rotor the remove the brake caliper and the wheel and the caliper then the rotor.

[andrewd523]

What is the axle wheel hub nut?

I'm still trying to figure out this step by step.

[rooster300ex]

Originally posted by andrewd523
What is the axle wheel hub nut?

I'm still trying to figure out this step by step.

Its the big nut that holds the hub on the axle. It also has a cotter pin through it for safety. Anyways after u get that off take brake caliper off and remove the three nuts that hold the rotor on. Very simple

[Baileygunns]

You can thank me later...

'01-'06 TRX300EX Service Manual (http://www.4shared.com/document/wnLv6e7i/Honda_Trx300ex_Service_Repair_.html)

[andrewd523]

Thank you!

Thank you!

Thank you!!!!!