CR85 in ECX70

[Hoosierd]

Hi folks!

We are new to the mini scene. Lots to learn and man have we been doing that!

Anyone that runs a CR85 (shifter) with the Wiley mods adapter here?

Need pipe help. With some fabrication I can make the stock 70 pipe work but I am sure that will be a power robber. Anyone have luck with anything else?

Any help would be greatly appreciated.

-Dan

[aarond]

I justr put a rm85 in my daughters apex , i had to cut around the bottom bend in the pipe and turn it and shorten up the stinger which will give higher revs and less torqe , but it is still very fast ,if something was lost it wasnt much , the cr as i understand has alot of tourqe but less high rpm so it may not hurt as much as long as your a good welder.bad welds inside your pipe will rob alot .

[Hoosierd]

Thank you very much for the help! I am a pretty decent fabricator, just nervous on the power loss/tuning I guess. Best of luck to you and your daughter, ride hard!

-Dan

[heathmxracing]

Trackside Performance makes a pipe that will bolt right up to your quad.

[Hoosierd]

John, I was afraid that would be my only option....Got any used ones laying around? LOL!

[heathmxracing]

Nothing to be afarid of. It's a great product and will add some power.

[edwardsp&b]

I wouldn't have that motor in there without a trackside pipe. Spend the money, you will be glad you did! Trackside all the way!
Bryan

[Hoosierd]

OK, ya'll talked me into it. :D