Aftermarket Bearing Carrier Help

[Latemodel32]

I bought this aftermarket carrier last yr for my 450R,but it was to long. So im thinking its for a 400ex or a 250R ?
Its measures 7 1/2" long.
Thanks

[Latemodel32]

2

[Latemodel32]

3

[Scro]

The 400ex swingarm is about 1/4" narrower than the 450r swingarm at the rear (where the carrier sits).

[400exrider707]

Originally posted by Scro
The 400ex swingarm is about 1/4" narrower than the 450r swingarm at the rear (where the carrier sits).

Isn't it the other way around? I remember trying to mount my RAD 400ex carrier in my 450R swinger and it was 1/4" too wide.

I had this posted somewhere but can't seem to find it. I had pics of the 400ex carrier and the 450R carrier side by side. I thought it was more like 1/8" too. It's been a few years since I looked at it though.

[Scro]

Originally posted by 400exrider707
Isn't it the other way around? I remember trying to mount my RAD 400ex carrier in my 450R swinger and it was 1/4" too wide.

I had this posted somewhere but can't seem to find it. I had pics of the 400ex carrier and the 450R carrier side by side. I thought it was more like 1/8" too. It's been a few years since I looked at it though.

You're right, I do have that backwards. The 400ex swinger is wider than the 450. If I recall, in order for the 450r carrier to work in the 400ex swingarm, you had to mill 1/8" off each side of the swingarm. If you didn't, the chain wouldn't line up correctly.

[Latemodel32]

so this is a 400ex carrier then ?

[Scro]

I made a copy of this in the 400ex section. Maybe someone in there will be able to measure their carrier.

[400exrider707]

EDIT*

Found the link....

http://www.exriders.com/vbb/showthread.php?s=&threadid=231470&highlight=brake+stay

That should answer some questions.

[Latemodel32]

Cool thanks now if i could only get someone with a 400ex carrier and a 250R carrier and tell me what they measure at.

Thanks