Anyone on here make gaskets?

[kookennay]

Is there anyone on here who makes gaskets? i need some head gaskets but i have a resleeve big bore, so i need some bigger than stock. it will be bored 73.5mm next bore. If no one makes them on here can you show me were to get some.

[slamdak8782]

i dont know if this will work but I saw some sheets of gasket matierial at advance auto the other day where you could cut out your own gaskets

[jcs003]

probably not good to make head gaskets. they are metal or composite for reason. the regualr gasket material can blow out easy.

[kookennay]

Yeah cometic makes the one i need but only as a topend kit. i don't need the whole kit because i run a long rod got to have two base gaskets. i had ordered a whole bunch of base and reed gaskets a while back. i would like to have a few head gaskets. yeah gasket material would never hold up by itself.

[snacob14]

give this guy a call 636-942-4884 he has a gasket on demand and can make you one.

[trx310R#24]

Originally posted by slamdak8782
i dont know if this will work but I saw some sheets of gasket matierial at advance auto the other day where you could cut out your own gaskets


bad idea :rolleyes: tryed it.... :p

[Pumashine]

I have 3 cometic 72mm stock 310 head gaskets. I think you are looking for the bigger ones for the overbore.

[kookennay]

Are they the 72 to 74mm ones? if so pm me what you would sell them for. i emailed cometic to see if i could get just the head gasket, still waiting for a response.

[Pumashine]

They measure 2.850 which only gives .015 clearance on a 72mm or 2.835. I know the piston does not come up that far but you would not want the gasket to be smaller than the grove cut in the head. I can call cometic if you want, I have been set up as a dealer at the business I work at. They are real nice people and usaully will sell anything individually.

[kookennay]

the one i got on there now is a cometic from there top end kit ans the piston is a 72.44 they say that gasket is good up to 74mm. but yeah any help you can give me on getting some would be awesome

[Pumashine]

Originally posted by kookennay
the one i got on there now is a cometic from there top end kit ans the piston is a 72.44 they say that gasket is good up to 74mm. but yeah any help you can give me on getting some would be awesome

I called Cometic tech line to find out they reccomend having the gasket made to your particular bore. They are spendy at $20 each plus shipping.