Dc Single Arms To Dual Arm Conversion Kit..

[oldschoolyamaha]

I have a set of DC A-arms that convert a single arm bike to a dual a-arm bike. Used on a DRR, I am told they will fit a Polaris but but will not fit Kasea or Eton single arm bikes. Call Scott 951-897-2841 or PM me with offers.




Pics of the a-arms..can be sent to email, this site wont let me add them, claim they are to large. Email for pics.

Will include, right and left upper and lower arms, spindles, tie rods, and relocation blocks. They are powered coated Bagel Yellow. Some nics in the paint but nothing major.

I ran 12 1/2" Elkas, shocks are not included.

Not really sure what to ask, pm me some offers.

[oldschoolyamaha]

BUMP

[otis]

Would this fit a predator 90> Does it come with hubs/spindles, etc. My email is quads@embarqmail.com for pictures please.

Thanks

[xtremeatv]

pics to xtremesalvage@gmail.com

[nastynotchback1]

helpful info: The e-ton and kasea are different.if they fit one they will not fit the other.Been there done that.

[xtremeatv]

Originally posted by nastynotchback1
helpful info: The e-ton and kasea are different.if they fit one they will not fit the other.Been there done that.

He is right there, the kaseas used a different way to mount the arms, they are like the dinlis in that respect.

The drr uses the same lower mounts as a predator or an eton but i think the eton frame has slightly different geometry in the front, you might have clearance issues with the arms and the upper mounts might not bolt on properly. The shocks may not line up well either.

However i believe the predator frame is actually pretty close to the old drr frame, it might just work for that one. Wont really know till you try.

[otis]

Still haven't recieved pictures. quads@embarqmail.com

[ff1125a]

PM sent

[xtremeatv]

I was originally thinking before i got the pics these were a different style of kit. I know what these are, i have a set on one of my minis right now!

YES it will fit on a predator and rather nicely at that.

Yet it will fit on an eton....but there will be clearance issues....easy fix though if you got a bit of heat and some vice grips and dont mind tweaking a frame rail slightly, lol. you can adjust it so it will clear an eton frame but when you put the upper heim joints out too far they tend to bend...not a good thing.

[oldschoolyamaha]

THANKS FOR THE INFO...

[oldschoolyamaha]

Ok ya'all.. Just got off the phone with Dave Carter @ DC Motorsports. He said these will fit a DRR and a Polaris. Will not fit a Kasea or Eton. He said a fair price would be 350.00 So there we have it. Thanks..

[oldschoolyamaha]

BUMP

[walty]

pics plz
martin_whitty@hotmail. com