f4istunna
11-20-2010, 02:56 AM
located near youngstown ohio. pickup or meet up with cash or will ship and can accept paypal or money order.
I have pics of everything so just ask and ill post up or can email them to you.
- Lonestar extended axle. some surface rust but axle is straight, good splines and threads. Comes with 2 1" spacers, stock locknuts. Measures 39" end to end. $110
-Extended a arms standard travel beleive they are lonestar but not 100% sure they have heim joints straight and solid lowers are 16" fron center pivot to center bj stud uppers are 13" $150 black arms, chrome tie rods. Could use new paint or Pc
- Complete rear brake system. Caliper, stock line, master cylinder lever and resi. Brakes worked, no leaks. Lever could use painted. $80
- Stock ignition coil good spark $10
- Kicker lever and knuckle still seems pretty tight. $20
- Left and right stock spindles. Straight with good threads $30
- Stock rear wheel hubs (pair) $30 good studs and splines, lugnuts included.
- Aluminum rear grab bar Not sure the brand straight and solid $20
- Front wheel hubs and rotors (pair) Rotors have some minor wear but are straight and useable, good bearings. Could use paint or powdercoated. $20
- Rear brake hub and rotor Rotor straight hub looks good $15
- Engine cases upper and lower. Upper great shape, lower has been repaired, no leaks good studs/threads. $75
- Stock radiator no leaks, has a few fins flattend out here and there $10
4 Mil crank with 2mm spacer plate for base of jugs looks to be vitos crank with short (110mm rds) (has Pc stamped on it) true and welded good shape $275
- stock stator w/ pickup works good $60
- stock rear shock $60
-wiring harness with stock cdi harness has a few ends cut off but main plugs are intact $40
- good kicker shaft with spring/bushing $5
- good shift shaft $5
-case saver with bolts $10
- Modquad head with 22cc domes, head has 2 bolt holes that will need repaired (prev. owner tried to put bigger bolts in jugs instead of helicoiling the right way and cracked the inside edge of 2 bolt holes. Easy fix for good alum welder fill and drill out. make offer
- Jugs 68mm will need a few studs repaired/helicoiled bores look good no scars or damage aside from normal wear, a crosshatch hone and should be ready to go. port/polish not sure what what type. make offer
- Lonestar antivibe stem with std. size lsr barclamps didnt have a stock stem to measure against i beleive this is +1 its 24" from center of steering/tierod flag to center of bar mount. chrome nice shape $130
- Stock frame straight/solid needs paint, has stock pegs welded to it. pickup only $50
I have pics of everything so just ask and ill post up or can email them to you.
- Lonestar extended axle. some surface rust but axle is straight, good splines and threads. Comes with 2 1" spacers, stock locknuts. Measures 39" end to end. $110
-Extended a arms standard travel beleive they are lonestar but not 100% sure they have heim joints straight and solid lowers are 16" fron center pivot to center bj stud uppers are 13" $150 black arms, chrome tie rods. Could use new paint or Pc
- Complete rear brake system. Caliper, stock line, master cylinder lever and resi. Brakes worked, no leaks. Lever could use painted. $80
- Stock ignition coil good spark $10
- Kicker lever and knuckle still seems pretty tight. $20
- Left and right stock spindles. Straight with good threads $30
- Stock rear wheel hubs (pair) $30 good studs and splines, lugnuts included.
- Aluminum rear grab bar Not sure the brand straight and solid $20
- Front wheel hubs and rotors (pair) Rotors have some minor wear but are straight and useable, good bearings. Could use paint or powdercoated. $20
- Rear brake hub and rotor Rotor straight hub looks good $15
- Engine cases upper and lower. Upper great shape, lower has been repaired, no leaks good studs/threads. $75
- Stock radiator no leaks, has a few fins flattend out here and there $10
4 Mil crank with 2mm spacer plate for base of jugs looks to be vitos crank with short (110mm rds) (has Pc stamped on it) true and welded good shape $275
- stock stator w/ pickup works good $60
- stock rear shock $60
-wiring harness with stock cdi harness has a few ends cut off but main plugs are intact $40
- good kicker shaft with spring/bushing $5
- good shift shaft $5
-case saver with bolts $10
- Modquad head with 22cc domes, head has 2 bolt holes that will need repaired (prev. owner tried to put bigger bolts in jugs instead of helicoiling the right way and cracked the inside edge of 2 bolt holes. Easy fix for good alum welder fill and drill out. make offer
- Jugs 68mm will need a few studs repaired/helicoiled bores look good no scars or damage aside from normal wear, a crosshatch hone and should be ready to go. port/polish not sure what what type. make offer
- Lonestar antivibe stem with std. size lsr barclamps didnt have a stock stem to measure against i beleive this is +1 its 24" from center of steering/tierod flag to center of bar mount. chrome nice shape $130
- Stock frame straight/solid needs paint, has stock pegs welded to it. pickup only $50