What do you suggest?

[BadA$$440]

Ok, i got a pratice track ( XC )by me and i have rode it alot so its pretty tore up and the turns dontreally have a berm, theyare just ruts and sometimes when i go into tem kinda fast i two wheel ot of them. Is this somethig that just happens or is my suspension not setup right?

Do i need to lower the ride height (make it sit lower) or compression?

or

Do i need to stiffen the compression or makeit sit higher?

I have 3 rate elkas.

Thanks

[OCCRA288]

I would soften the shocks up a little bit so the outside shock would compress a little more, this will give more body roll but shouldn't affect it too much. Also check the ride height.

[Pappy]

i see plenty of fast riders railing a rutted turn on 2 wheels......as long as you dont scrub speed doing it...hammer down:macho there isnt a 4 wheel on the ground rule:macho :blah

[BadA$$440]

ya i see them two wheeling alot to. but sometimes i almost flip over.

lower the ride height or soften the compression?

and wouldnt softening it make it worst?

What size tires are you running???

[BadA$$440]

22'' holeshot xc's in the front

20'' razr in the rear

Are you using any body english????

I noticed mine doing that with the works up front but with the elkas on it..that's not an issue..but I'm also a MX guy and I'm used to sittin on the nerfbar when goin around a turn with the hamma down..:devil

[BadA$$440]

ya, i lay into it as much as possible.