attatching the FST oil cooler [Archive]

View Full Version : attatching the FST oil cooler

oregonrider89

02-09-2003, 10:12 PM

What is the best way to attach the cooler. I'm going to zip-tie the screen to the frame, but I'm not sure what to do with the cooler. Thanks for the input.

oregonrider89

Max400

02-09-2003, 10:47 PM

Just use zip ties to attach the cooler to the screen..........

Max400

02-09-2003, 10:48 PM

PHIL_B54

02-10-2003, 08:34 AM

WARNING!!! be carefull when drilling hole in clutch cover, its very easy to miss and put a hole into case

oregonrider89

02-10-2003, 10:41 AM

Does the cooler get hot enough to melt the zip ties? Thanks for the warning PHIL.

oregonrider89

Dudefire607

02-10-2003, 03:21 PM

Many auto parts stores carry Hayden Tranny coolers. Hayden makes these little zip tie things with a 1" plastic disc on the back side that you pull through the fins and slide another disc on the tie from the front 'til it's tight and then cut off the excess. Cost you about four bones. BTW - No the cooler can't get hot enough to melt zip ties, but if it did... the zip ties would be the least of your worries :)

DF...