Need Pro pegs

[GOTFEAR]

Were can i get new Pro Peg nerf bars for my LSR 250r frame

[red f-150]

Try buying some at the store

[gsxr68]

look we have an a s s h o l e

[red f-150]

Or a genius, but I will let u be the judge.

[250x_kyle]

Originally posted by red f-150
Or a genius, but I will let u be the judge.

what you dont understand is that these aftermarket frames are hard to find ones that fit. so leave now troll.

[red f-150]

What u don't understand is that "gotfear" is my best friend, and I helped him build his entire Atv, but thanks anyway for the info. You should prob. Stick to what u know, witch is not much

[tayyo789]

For future reference, sarcasm is difficult online.

[racernorris]

lonestar makes nerf bars, ac still makes them to.

[yamahopper]

on my lsr frame the closest i found were a set of blingstars...i have the dana creech series so the pegs go all the way out. i measured and the closest i could find were a set of honda 450r ones....i had to do a little heating and hammerin but it turned out just fine.

[gsxr68]

they really are a cute couple (gotfear and red F-150)

[Lasher]

I contact AC on their new nerfs with heel guards and waiting to hear back on actual measurements. They responded that they will get the info for me.

But on my 02 Walsh 250R chassis, the pegs have an outside diameter of 1 1/8 inches and the distance between the two pegs is 17 inches center to center. I have a set of the older style AC pro pegs and they fit pretty good.

I asked AC for my son's 09 Walsh CRF chassis and it is the same measurements. When I hear back from AC I will let you know.

Not sure of your LSR pegs measurements.

[maxamillion]

try getting ahold of rath they might be able to help you out. they made me a set for my yfz jb propegs which had 1 1/8 diameter tubes. they were 16in from front to back.

[Lasher]

I contact Rath before and they told me that they did were not making 250R parts anymore. I am sure money talks.

Still waiting to hear back from AC, but I might contact Rath with the measurements. Since last time I just asked about "250R pro peg nerfs" and not sure if any other models would fit. When I was at the track last season, I went to the dealer who was running a special on nerfs so he had a ton. None of them were even close.

[maxamillion]

ye try to talk to daryl and let him know the measurements. make sure he knows its a real propeg chassis and that you dont need any mounting hardware. if u talk to the lady that answers the phone and she says she will ask daryl and return ur call.. chances are you wont recieve a phone call back, at least i didnt after several attempts. as far as price goes i think it was about $350 for the standard finish.

[atvmxer79]

any luck finding someone who still make 250r propeg nerfs