push rod inside clutch basket

[The Quad Kid]

can anyone show me what a push rod inside the center of the clutch basket is suppose to look like on the end where it touches the clutch arm inside case cover. this is for a 400ex i think something is missing reason why my clutch is disengaging

[rubbersdown]

400ex doesnt have one. It uses a pin type thing behind the pressure plate and a grabber arm on the inside of the clutch cover pulls it and disengages the clutch. No rod whatsoever

[rubbersdown]

This is the pin in the center of the clutch basket...
http://i31.photobucket.com/albums/c368/rubbersdown/DSCN3392.jpg

then theres a little arm in the center of the clutch cover that grabs onto this and pulls it when you will the clutch lever and thats what disengages the clutch

[Zeb400EX]

Looks like this by itself

http://i44.photobucket.com/albums/f12/bez65/IMG_1350.jpg

[The Quad Kid]

okay so mine doesn't have that round flat piece on the end but where the heck is it lol. what that off a 400ex the picture you just showed me?

[CJM]

Then that part busted and is probably inside the case somewhere or it fell out when you opened it up.

Just need that piece and all should be well.

[The Quad Kid]

i figured it out jus took looking at a picture of what it's SUPPOSE to look like lol thanks to all who helped i appreciate it very much!!!