400ex rear end width question?

[trailrider894]

Hey guys, i have a 400ex with a G-Force axle. I am looking at getting some new wheels, and i am wondering are there different off-sets for the rear wheels like there are for the front? If so what are they?

[CJM]

Most common is 3+5 thats 3 inches inside (from center of wheel to axle/hub) and 5 inches outside (center of wheel to end).

http://www.mud-throwers.com/atv_wheel_chart

I have a g-force set to 2 5/8 and 3+5 and they stick out about 3 inches further than the fronts.

[trailrider894]

Originally posted by CJM
Most common is 3+5 thats 3 inches inside (from center of wheel to axle/hub) and 5 inches outside (center of wheel to end).

http://www.mud-throwers.com/atv_wheel_chart

I have a g-force set to 2 5/8 and 3+5 and they stick out about 3 inches further than the fronts.

how wide total is your rear end setup?

[CJM]

about 47 inches give or take an eighth or so.

Thats with the 2 5/8 axle setting, 3+5 douglass wheels and kenda klaw 20x11x9 tires.

Comparatively front is like 45 inches and all stock.

[trailrider894]

Originally posted by CJM
about 47 inches give or take an eighth or so.

Thats with the 2 5/8 axle setting, 3+5 douglass wheels and kenda klaw 20x11x9 tires.

Comparatively front is like 45 inches and all stock.

thanks man. I have a sponsorship with DWT and was doing some re-search before i get some wheels.

[CJM]

I got the alumilite A5 in 9x8 and love them. Sturdy as anything for my trail riding purposes and they are nicely polished.