Baileygunns
10-20-2010, 09:48 AM
Can some one tell me how wide the front end of 525 Outlaws are? More specifically the distance between the calipers with stock a-arms and also the distance from the union in the brake line to the master cylinder...
Wondering if the stock brake lines will mount up on a Honda 450R. Right now I have stock width arms with a +2 stem and CR high bend bars. I'm eventually going to go +2 arms and ATV high bend bars which would put the bars about an inch higher than they are now... The stock lines on the 450R are long enough for +2 arms but I'm at the limit for the bar height now and the ATV high bend bars will put me about an inch higher.
The stock lines on your bikes are braided and if they fit, would make a nice and low budget upgrade for me... Any help would be much appreciated.
Thanks Guys!
Wondering if the stock brake lines will mount up on a Honda 450R. Right now I have stock width arms with a +2 stem and CR high bend bars. I'm eventually going to go +2 arms and ATV high bend bars which would put the bars about an inch higher than they are now... The stock lines on the 450R are long enough for +2 arms but I'm at the limit for the bar height now and the ATV high bend bars will put me about an inch higher.
The stock lines on your bikes are braided and if they fit, would make a nice and low budget upgrade for me... Any help would be much appreciated.
Thanks Guys!