PDA

View Full Version : tie rod ends



skyeryder
10-14-2010, 10:29 AM
It looks like my 450r Honda ends will work is this correct? and do they both mount with the balljoint part on top? Thanks for the help

TeamNeilson
11-30-2010, 06:22 PM
I was wondering this as well.

It looks like the stock Cobra matches the ones off the 400EX and the TRX450R (They have the same honda part number), but the Cobra number has no real indicator.

I need a set as well but don't want to order them unless i know for sure..



If some of our Cobra guru's could give us some advice :)





Oh.. When I took mine off, both the steering stem side and the hub side, the threaded part was pointing down and the nut was put on from the underside of the bike.