PDA

View Full Version : 250r Questions. Need Help


CHAUNCY
02-07-2003, 05:53 PM
Hey
I was wondering where are the numbers on the frame on 86-89 ??? Are they all in the same place ??? Also I need to see some pics of the bottom of a 250r frame. I think I have an 87 frame but am not sure and want to know ASAP. Any help would be appreciated.
blastersrule
02-07-2003, 06:11 PM
:eek: :devil :blah
CHAUNCY
02-07-2003, 06:46 PM
bump
powerslider
02-07-2003, 07:21 PM
The VIN plate on the 86 87 is near the rear shock reservoir welded to the frame. The 88 89 is between the front upper shock mounts. 87 frame would have bolted on footpegs, 88-9 the bracket is part of the frame.
02-07-2003, 10:03 PM
Originally posted by powerslider
The VIN plate on the 86 87 is near the rear shock reservoir welded to the frame. The 88 89 is between the front upper shock mounts. 87 frame would have bolted on footpegs, 88-9 the bracket is part of the frame.
this is correct;) ,so if its not between the shock mounts its prolly an 86/87...
CHAUNCY
02-07-2003, 10:05 PM
can you guys post some pics of the bottom of 250r frames ???
I need to see if i am missing support brackets on he bottom near the back. Thanks for the info so far.
alias
02-07-2003, 10:06 PM
frame numbers are at the bottom of this page: http://www.macdizzy.com/trx_specs.htm
CHAUNCY
02-07-2003, 10:08 PM
Originally posted by alias
frame numbers are at the bottom of this page: http://www.macdizzy.com/trx_specs.htm


I appreciate the help
02-07-2003, 10:13 PM
heres my 87 ...dont know if it helps ...but here ya go
CHAUNCY
02-07-2003, 10:16 PM
Originally posted by "2-R's Rider"
heres my 87 ...dont know if it helps ...but here ya go

Im missing the two back bars that are diagnol and at the bottom of the frame. Thanks 2 r's
kwatts400
02-07-2003, 10:18 PM
If you think your missing a back motor mount, take a look at the frame above the swingarm bolt. if it is curved it is an 88-89. These years dont use the motor mount, it is bolted to the frame. I just bought an 89 and thought I was missing the mount as well until I found this out.
02-07-2003, 10:18 PM
Originally posted by CHAUNCY
Thanks 2 r's
yupper ,..glad to help
kwatts400
02-07-2003, 10:20 PM
I should have said the part of the frame that parallels the swingarm would be curved, dont want to confuse you.