Roller weight spring and belt replacement

[sparrino]

I am going to attempt to change all of these, in hopes of getting the DRR 50 to come on a little sooner than it currently does (stall speed?). i have all the parts, thanks to Gary of G Force. Any suggestions on procedure would be much appreciated...

[fomospede]

stall speed ,with your machine on the stand gently bring the rpms up till the tires start to quiver as the clutch shoes are moving out and hitting the bell ,with that said the lower the stall the longer your clutch spring and belt should last ! you must have a tach there is no other way at all ,and hopefully your bell has a hole to adjust the springs without removal! my .02

[nitrofish]

What parts did you get from gary? I am sure he steered you in the right direction. Is your question, how to go about changing the springs, rollers and such? We had good luck with yellow malossi spring and 3.5 rollers on our stocker. Stall is preference and rider ability IMO. 6000 rpm stall is a good place to start.

Matt.