riggsracin
10-04-2010, 09:42 PM
i bought a 86 250r not firing. i replaced the cdi and it ran, then tested the stator and it tested bad. it still fired just wouldnt open up. so i got a stator from a guy used and it ran the same, sure it bad but. it fried my cdi or atleast i think it did. but i orded a new stator 200 watt and i figured i would just replace all the wiring going to the cdi from the stator , then from the cdi to the coil. so i need a wiring harness lay out. any one else had this problem.