oil not draining

[sdyme1995]

So I have my cylinder off to do the top end. I poured some oil into the case to flush out anything that might have fallen in or coolant. But it wont drain out. Yes the drain bolt is out.

[JTRtrx250r]

you did pour it down the filler hole, right?

You poured oil into the crankshaft area or into the Clutch Cover area?

Another way to ask the same question; you removed the oil plastic plug from the clutch cover and you poured oil into the clutch area or you poured oil on the crankshaft?

Carlos.

[87TRX310R]

Sound's like he poured it over the crank, not good

[Fear250r]

Originally posted by 87TRX310R
Sound's like he poured it over the crank, not good

X2. I think he poured it in the wrong spot...

[JTRtrx250r]

sdyme, see...your learnin'....what not to do, you'll be ok tho

tip the bottem end over and let it run out, if you can..take a little bit of gas and help flush it after draining it. It might smoke a bit more and smell funny for a sec after you get it back together...but it should be fine

good luck

[sdyme1995]

Hey sorry guys i wasn't to clear, my wife was rushing me to go so we could make it to dinner. Yes i poured it on the crank. Its been 6 years since I had the bottom end apart on this and i thought I could run a little oil through it and flush it. Well i was wrong. :(

[kookennay]

I FIGURED OUT THAT THE HARD WAY TOO.