Honda 250r 001
10-01-2010, 07:19 PM
Just thought i would let you guys know that a 97 suzuki RM 250 brake pedal goes on a 250r with few mods. Looks much better IMO, and is half the weight of a stocker. Its the same length maybe 1/4 shorter.
To install, all I had to do was knock the stock brass instert out of the RM pedal, and slip a piece of hard plastic hose over the frame piece for a bushing slide a couple o rings on each side to seal it, and everything else was pretty much bolt on, stock master cylinder, stock return spring, its the same width, the clevis is inline with the pedal with no mods. The only mod you may have to do is shorten up your master cylinder arm by 1/4 if you like your pedals to hang lower. This pedal has a steel insert in the master cylinder clevis hole for longer life. No more worn out hinsons! or paying 125 on ebay for one!
Just thought i would post what i have found, if anyone cares.
To install, all I had to do was knock the stock brass instert out of the RM pedal, and slip a piece of hard plastic hose over the frame piece for a bushing slide a couple o rings on each side to seal it, and everything else was pretty much bolt on, stock master cylinder, stock return spring, its the same width, the clevis is inline with the pedal with no mods. The only mod you may have to do is shorten up your master cylinder arm by 1/4 if you like your pedals to hang lower. This pedal has a steel insert in the master cylinder clevis hole for longer life. No more worn out hinsons! or paying 125 on ebay for one!
Just thought i would post what i have found, if anyone cares.