zilla front shocks

[sikadelic]

just wondering if any one has adapted any newer front shocks onto their zilla? maybe from the ltr450 or z400? or what aftermarket ones do you guys like?

[headache]

whats the stock length on the zilla shocks? I'm running 660 raptor length shocks on my lt250 (15 3/4") and love them. they are works dual rate shocks.

[toolmanlt250r]

did the 660 raptor shocks bolt on without any modification to shock mounts? thanks

[headache]

the bottom mount bolts right in. the top you have to grind the bushings down(make the top thinner) to make it fit in the LT's mount. Not a big deal. I would only recommend this length shock on some +2 arms. They will just be too long with stock arms..

[Tommy Warren]

I have some works dual rate shocks with remote ressies for a 660 if your interested....they are rusty and need to be rebuilt but I'll take 150 +shipping

[hawaiianbasshed]

zilla's use a shorter shock than the 87+ 250, it's in the 14" range for sure. not really where what stock is but I know it's under 15" and the works on my 250 and other 87+ 250s is 15"... for stock arms.

I think stock length 400ex is close and banshee shocks are 14.5" IIRC not that I'm recommending those. but when I talked to fox they said I could try the banshee floats :) as well as a couple others for my 250, the banshee shock off hand I know is close to what you need for a zilla as far as length goes. .25" shorter I think.. but I don't have a zilla this is from rearing posts on qrhq.com ;) as well as a few other places. but I don't have any solid info beside the shee shocks are probably the closest to what a zilla needs as far as what's available in MANY options, like I said, fox floats come in that length so that is a VERY hard bolt on combo to beat...

[hawaiiysr]

Banshee shocks are not recommend as replacement Quadzilla shocks. They are the WRONG length.