Log in

View Full Version : aftermarket throttle for 07 525



outlawjeff
09-26-2010, 08:19 AM
i am wanting to get rid of my stock bulky throttle on my 07 525. i found this throttle on ebay, it is a chariot performance throttle it says it is for honda trx yamaha and ktm. i am just wondering if it will work on the outlaw? if anyone give help me out before i spend the $125 for it so i dont get the wrong stuff. here is the link that i found it on in ebay.

Chariot Performance



http://stores.ebay.com/Chariot-Performance

sleddog66
09-26-2010, 11:11 AM
I do know that many people have switched over to the OEM throttle from a 450 honda. you do not get the saftey kill wiring with this option, but many have liked it. I also think they can be found for much less than $125. I have NOT done this mod.

Pokoki
09-28-2010, 08:15 AM
What throttle did you end up going with?

outlawjeff
09-29-2010, 05:54 AM
im still trying to figure it out. have not ordered anything yet.

Polaris 450MXR
09-30-2010, 04:00 PM
I have the Honda throttle on my outlaw. Ebay $12. The plastic sleeve by the stock throttle is not threaded but is very close tho the same diam. of the stock honda throttle cable. All I had to do was screw the plastic sleeve into the honda throttle and wamo a much eaiser throttle tu push with your thumb, and you will have a much smaller growth on the side of your index finger knuckle ( I thought I was growing a 6th finger until I made this MOD!)

My throttle is a 250x but the 450r is suppose to be a little better. Good luck.

If your about the Bling than by one that is expensive, If purpose is the main concern just go with a stock honda throttle!

Pokoki
10-01-2010, 07:00 AM
Do you have any pics of honda throttle on your bike?