Has anyone ever this setup?

[bigmatt61]

I was told this a Laeger No link swing arm circa 1994-96. Can I get confirmation on that?

[bigmatt61]

Another one.

[bigmatt61]

The rear (non clevis) shock bolts to the aluminum piece then that gets bolted to the swing arm in the slot.
To adjust your ride height quick, it looks like all you do is UN-bolt the bracket and slide it forward and back.
The piece that is cut out of the swing arm where the pivot bolt goes through was done by the previous owner.
He made it a Laeger Pro trax, no link, narrow frame into a mod quad by putting a crf 150 motor in it.
The frame needs to be fixed where some material was removed and the head stay tab was cut off. The swing arm also needs to be fixed, as seen from the pics.

This chassis, swing arm, and +4 front end might be for sell. Soon!


Matt

[hartwill]

someone just showed me a swing atm like cut like that, they said it was for a cr250 motor.

[dustinshuler]

I assure you that is early Leager!! I had one. Leagernkentucky (sorry for botching that up ky) has one right now. Looks like someone cut it for a hybrid conversion!