PDA

View Full Version : yfz 450/yz250



yamahahaha
09-18-2010, 04:45 PM
i have an idea... buy a blown up yfz. and get a yz250 motor and put it in, i have someone to make motor mounts and pretty well anything. what do you think

Darthgeese
11-01-2010, 08:37 AM
i say do it. 2 strokes where its at. Either do that or go buy a trx250r :devil:

jakes
11-02-2010, 04:11 AM
Easy to do, all you need is the YZ/WR motor(motorcross/cross country). The YZ/WR carb, YZ/WR wiring loom. Change the lower back engine mounts on the bottom of the frame, fabricate 2 new front engine mounts, cut the YFZ450 swing arm about 1/2 inch where it bolts to the frame to align motor(front and back sprockets), and modify a 250 aftermarket pipe(to fit to the 450 frame - pro-circuit works well.)

Biggest andvantage - standard 250 quad produce 15-18hp, highly modified RAGE 250 motor produce 30Hp. The hybrid build, standard with the YZ/WR motor produce 30Hp. Do head flow, cams, high compression piston and some odds and ends and you will soon be very close to 40Hp - very reliable!!

TORO1968
11-02-2010, 07:28 PM
I believe he was referring to the YZ250 two-stroke, not the YZ/WR250F four-stroke...

quadrider2112
11-03-2010, 11:48 AM
Do it and post pics! It would prolly be pretty wicked.

RichM1983
11-22-2010, 08:28 PM
As with any motorcycle motor in a quad frame it would vibrate like crazy if you just fabbed up solid mounts.

tt racer
11-24-2010, 09:56 AM
Dont do it the vibes will be too much, its not counter balanced. People have done this before get a trx 250r.