416EX Partout! Almost ALL aftermarket!

[childert79]

Was in the process of building a 400ex and don't have the time to finish it so I'm doing a feeler part out. Will not part unless I someone buys the engine and I don't have the time to part the engine.

THE ENGINE IS AN 02 NOT 05
The Engine was built by a local shop here in southern oklahoma. It was split and everything was checked to make sure it was good. It's been bored to a 416 with 11/1 wiseco piston (can run 93 pump), hotcams stage 2 cam, HD Timing Chain, mild p&p head, new oem valves, FST HD valve springs, tusk clutch kit, magnetic oil drain plug, all new cometic gaskets beside the base gasket being done with some silicone stuff that FST said to use/do. Also comes with a SS pivot bolt, FST oil cooler, Spare Rocker cover, a cylinder that needs to be resleeved! ENGINE HAS NEVER BEEN RAN! Have Receipts for work

The tires are brand new Maxxis Razor's and the wheels are ITP Beadlocks Dual in the rear single in the front. They are a little rough and have been spray painted bedliner black and rings are painted red with lookes like orange powder underneath. The rear wheels have a nut and washer on the back because the actual nut that is part of the wheels were broke due to previous owner letting the bolts sieze up and trying to take them out.

The rear end is a stock 06 450r swinger (+1.2inches) w/matching shock and linkage w/lsr +2+4 axle, lsr twinrow carrier, lsr locknut/rotor hub, 400ex brakes with new pads and lsr parkbrake delete.

Engine with FST oil cooler 500
05+wiring harness w/AMR Stage 3 box & pro armor kill switch 30
CFM oil tank w/lines and cooler 100 whc has dibs SOLD
AC Pro peg nerfbars 150 nickmyrick400ex has dibs SOLD
FMF Powerbomb Header 60
LRD Slip on 120 nickmyrick400ex has dibs SOLD
ITP Beadlocks single front dual rear with razors 350 nickmyrick400ex has dibs SOLD
Front brakes 06 450r spindles/rotors/calipers 60 whc has dibs SOLD
Burgard +2 +1 Arms 200 SOLD
450r GTT Dual Rate shocks 225 SOLD
Black ASV Clutch/Brake Levers 80 SOLD
Front +2 SS I-shock/Spyder lines with 4 clamps 50 SOLD
06 450r swinger w/shock & linkage 100 SOLD
LSR +2 +4 axle w/LSR Twinrow Carrier & LSR Locknut/rotor hub 200 yamaha_racer88 has dibs SOLD
Proarmor A-arm/chassis skids 100 400exMonkey07 has dibs SOLD
AC front bumper 20 FL-R has dibs SOLD
04 450r carb w/zr adapter and jets 100 SOLD
Insane Performance Airbox w/K&N Filter and outerwear lid 80
Air Shrouds 20 SOLD
Mystery dual row carrier missing one spacer it looks like. 10
ESR Airbox Lid 30 or w/airbox and uni filter 50 woodsridn400 has dibs SOLD
FMF slipon It's rough had to be rewelded and the spark screen is torn 30 ZSK has dibs SOLD
450r rear brake caliper/line/MC/Pedal w/lsr pb delete 30
250r Antifade locknut/rotor hub with rotor 40
Mystery red ASV Lever 10 SOLD
06 Gusseted Frame w/subframe both powdered texture black w/450r ac grab bar 250 woodsridn400 has dibs SOLD
Stock 02 Frame w/subframe 100

FRAMES COME WITH TITLES!!!

ALL PRICES ARE WITHOUT SHIPPING!

Paypal is tchilders58@yahoo.com
Please be sure to leave note on your paypal payment with what parts you bought and your name here on the forums.

Also if anyone can help me find a place to get cheaper shipping that will reflect on prices.

Pics
http://tinypic.com/useralbum.php?ua=4j2aR7oc3wcQ0AcBoWSj2g%3D%3D

I AM PARTING IT OUT!

[raykspradlin]

pm sent

[raykspradlin]

I just msgd you about the a arms. I'm also interested in the levers and carb. Does the carb come with the throttle cable and thumb throttle? Send pics, I am interested ASAP!!!! Thanks again!!!!!!!!

[raykspradlin]

thanks on the dibs bro...i do appreciate it man...

[waychoff05]

850 for the motor shipped

[Baileygunns]

Intersted in that front bumper if you can get me some better pics...

[graydevil]

do u still have the motor??

[childert79]

I'll post more pics in the morning and I should have replied to all pm's but if I haven't just pm me Also found another ac racing front bumper one is silver one has been painted black.

[yamaha_racer88]

would you be able to take 200 including shipping on the rear axle/twin row carrier and bearings.
if not, what would price be shipping to louisville ky. 40216
if u could/ or would like too, email me at mark_chevrolet@yahoo.com
im deff. interested in this axle set-up.

[childert79]

I'm going to take more pictures right now and I might find more parts. I'll get all shipping quotes tomorrow afternoon and pm everybody the quotes with shipping.

[waychoff05]

So is that a no for the 850 shipped for the motor?

[yamaha_racer88]

very much appreciated

[childert79]

More Pictures in the SAME link posted.

[yamaha_racer88]

very much appreciated

[Baileygunns]

How does FL-R have dibs on the bumper when I'm the first to post on it?

I wanted pics to show if there was any damage to either bumper with a TWO PMs sent, not just a post on the thread... I would rather have the non-black one if it's not damaged... The pics don't show the front!

All I need is a price with shipping to 32796.

[childert79]

You did post up on the thread first but he pm'd me 38 minutes before you posted or pm'd. Sorry for the crappy pics. I'll post up more pics tomorrow afternoon. They both have slight damage but don't seem bent. I'll post closeups of the damage. and It looks like the black one was just spray painted over it. I might have some aircraft paint stripper that'll take care of that.

[Baileygunns]

Fair enough... I'll put my foot in my mouth now. lol... I have a can of striper too, makes quick work of spray paint.

[FL-R]

I dont mind the black. Im going to strip it and cut the screen out. Where is the damage? And did you come up with a price for the thumb throttle.

[childert79]

I need everyone to pm me info for sihpping quotes. I deleted my messages in my inbox.
whc
nickmyrick400ex
raykspradlin
mpblaster287
yamaha_racer88
400exMonkey07
FL-R
hickenfitch
Baileygunns

Sorry guys just pulled a stupid and trying to get this done. I'll post my paypal up tomorrow morning and It'll take me 3 days to ship out after the first payment hits my account. I'm a broke college student so I need money for shipping before I can ship. Just letting everyone know and trying to make sure everyone is comfortable with it.

[trailrider894]

Do you still have a-arms? If so, i have kash in hand !!

[raykspradlin]

trailrider894, did you happen to catch the names next to the parts???? Typically that means that parts are spoken for...or did they not teach you that in parts buying etiquette 101???

[trailrider894]

Originally posted by raykspradlin
trailrider894, did you happen to catch the names next to the parts???? Typically that means that parts are spoken for...or did they not teach you that in parts buying etiquette 101???

raykspradlin, yes i did just so happen to catch the names by the parts. For your information i have bought and sold MANY parts from this site, i have been a member for many years and have hundreds more posts than you. Nobody wants people on this forum that are going to be cocky about such things. We try to be nothing but 100% respectful, but we aren't gonna stand for people acting immature like you are. Now you can't blame a guy for trying to pick up some cheap parts.

[raykspradlin]

cocky? Immature? I'm not going to argue with you over a website, especially over something so minor and insignificant, BUT to call me cocky, when you were the one who was arrogant enough to actually not have enough respect to say "hey, I see someone has already said they want the a arms, and have actually posted a couple times about them, but if they're not interested, I have cash in hand, and I'll take them." Come on now...let's all just grow up here. We're all trying to get a good deal. It doesn't matter how many times you've been on here, how many posts you've posted, parts you've bought, etc...anyway, moving on...

[trailrider894]

You are totally right... we are all trying to get a good deal, so you can't blame a guy for trying. THE END >.>

[Baileygunns]

Wow...

[raykspradlin]

THE END??!? Kinda like a story line, huh?? love those last liner people...lol...

[trailrider894]

we can extend this out if ya want, because i have all day. I just find it foolish to do so. All that will happen is everyone will sit around and defend themselves till the cows come home and nobody will have ever gotten anywhere.

[raykspradlin]

ditto

[trailrider894]

At-least we agree on something. Good luck buying, and welcome to the forums.





" Integrity is like virginity, once you lose it you can never get it back. "

[childert79]

If you're going to "extend this out" go somewhere else and do it please. I don't mind the bumps but I don't need my thread to have an argument in the middle of it. The arms have been spoken for and you would be 5th on the list. I'm updating pics and it's cool if you don't wan the bumper. I'm getting quotes right now. Sorry its taking so long but I go to school during the day and work night shifts but I'm getting it done asap.

Also found some more parts so I'm updating the list.

[childert79]

I'm trying to get shipping quotes ready. If anyone can help me find a place that ships stuff for a reasonable rate let me know. My local place wants to charge an arm and a leg.

[Baileygunns]

With all the eBay stuff I do, I usually find USPS to have the best rates... Most of the stuff I send priority and the big thing go parcel post. It may take a day or 2 longer but it's quite a bit cheaper... As far as the motor and frame you could look at Greyhound Bus (no joke) or a freight company. It cost me $75 to ship a CBR1000RR motor (way bigger than a 400 motor)...

Just my .02

[childert79]

That's who I'm using. I'm going tomorrow around lunch time to get all the shipping quotes and I'll pm everyone the prices with shipping.

[childert79]

I just pm'ed everyone total prices with shipping. If you didn't get a pm with prices pm me.

[nickmyrick400ex]

payment sent!!! bump bump

[Baileygunns]

Got the bumper today! Great seller!

[ZSK]

Sent you a PM on the FMF

[childert79]

Pm's replied. If my inbox fills up post up here to let me know. I'll be checking the thread and pm's atleast 3 times a day.

[yardbird]

do u still have carb

[childert79]

Yep and Sorry I didn't pm you. Had a lot of people to pm and must have accidentally skipped you. I'm giving the first person until friday to contact me and if it falls through its yours.

[woodsridn400]

send me a pic of the esr airbox lid, i was wanting that outerwares cover thats in the pic with uni and stock box

[childert79]

I'll e-mail you pics tomorrow afternoon.

[nickmyrick400ex]

i was just wondering if my stuff was shipped yet

[childert79]

It's all been shipped.

[yardbird]

so what about carb do u still got it or what send me a pm please

[woodsridn400]

can u send me pics of the air box lids? and air boxes swishg23@hotmail.com

[childert79]

raykspradlin your pm box is full but yes i have the stuff ready to ship. Just pm me when you pay and I'll ship it out monday morning.

[ksanfordc]

pics of all the plastics and headlte plz
charkeith06@comcast.net

[250rforlife]

pm sent on motor

[yardbird]

Originally posted by childert79
raykspradlin your pm box is full but yes i have the stuff ready to ship. Just pm me when you pay and I'll ship it out monday morning.



DO YOU HAVE CARB AND DO U WANT TO SELL ????????????????????

[childert79]

Just pm'd everyone and If raykspradlin doesn't pay by wednesday then he loses his dibs. Sorry for not responding sooner but was out of town.

[ksanfordc]

did you get pics of the plastics yet

[ksanfordc]

did you get pics of the plastics yet

[trailrider894]

ha ha .... after all that he won't pay. XD

[childert79]

He says he's paying today and I'll post up if things sale and yes I have pics and I'm sending e-mailing the pics.

[PaRedneckRiders]

would the 250r anti fade locking nut work on a 400ex??
if so im interested in it
The air shrouds
and the ss +2 brake lines
If u still have that stuff im interested so would u please PM me

[ksanfordc]

do u have pics or not

[childert79]

Just e-mailed all the pics and if you don't receive the e-mails the pics are uploaded in the link I have posted. Sorry it took so long guys. It's been a crazy day.

Also I'll be pm'ing the people in line about the levers, arms, and carb setup in the morning if raykspradlin doesn't pay tonight, and the to 250rforlife I haven't found all of the receipts yet but will be posting/e-mailing you pics tomorrow.

The 250r lsr hub/locknut won't work on the 400ex unless you run the 250r rotor caliper and brake stay i think.

[childert79]

Bump

[Stig_Blomqvist]

Can you send me pics of the Burgard arms? Are they LT?

[childert79]

The arms are standard travel and pics are in that link but i can take more if your looking for specific pics. They were just mounted once and never ridden on. I bought them new.

Also I'm tracking down the receipts to the motor. Sorry it's taking so long.

[childert79]

BUMP! Can only find the receipt for labor on the engine and not the parts.

[Baileygunns]

Got my second round of parts!!

A++ seller here!

[childert79]

pimpin330ex you inbox is full and $210 shipped on the arms.

[1987TRX250X]

PM'ed you! Thanks!

[graydevil]

do u still have the motor? email me if u do. rtstables@aol.com

[glatf70gg]

Do u still have the pipe. Will u do $120 shipped to 17315 York, pa

[childert79]

Pm'd and e-mailed

[childert79]

Updated the list and found the receipts for all of the labor on the engine. Trying to find receipts for all of the parts.

[childert79]

Sale Pending on the a-arms, 450r shocks, +2 brake lines, 450r swinger and shock.

[z400mayhem]

Would I be able to use that AMR rev box with just a stock 400ex? Im interested in that.

[childert79]

Should work fine with a stock 400ex. The only difference between the stage 1-3 is the rev limiter and timing curve gets a little more aggressive for each stage.

[childert79]

BUMP to get the rest of this stuff sold

[childert79]

Bump! New Prices!

[dman400ex]

If you still have the back brakes ill take them

[dman400ex]

Do you have the 2005 plastic still. And how much for fmf header to 35475

[graydevil]

do u still have frame if so how much u askin