PDA

View Full Version : 07er Carb on 05



Balaz_73*00
09-17-2010, 09:51 AM
Similar thread to Lquad but just wondering what all I need to do this. Mainly need to know about the heatsheild, the boot from motor to carb, and the boot from carb to airbox. Do I need an 07 airbox and boot or just the 07 boot to put in the 05 box? Also, what all needs to be done to wire it up?

antwanrttg
09-17-2010, 10:48 AM
I'm assuming this is George's brother ....

Head to carb boot is the same. I don't have a heat shield on my quad so it was never an issue. However, I have researched this quite a bit and if you have an 04-05 shield it might have to be cut because the FCR off of later model TRX's is a bit taller than the 04-05. Otherwise you'll have to use a heat shield off of an 06+.

The 05 and 06+ airboxes are completely different and the intake tubes are different. You have two options: buy the NOSS adapter and keep your 04-05 intake, or use an 06+ intake and airbox. As far as the wire up check out the link below.

If you have anymore questions you can email me.

antwan.rttg@gmail.com

http://www.trx450r.org/forum/118-engine-tech-faq/89024-fcr-tps-wiring-cross-reference.html