Intake help

[born2ride14]

Hey guys i need help with ideaa on an intake on my hybrid.. U have been running a pod filter which works good but the rubber part of the airfilter hits the frame a little putting the carb and filter in A bind. So when i go ride the carb will fall off because of the preasure against the carb from the air filter hitting the frame heres a pik


http://i195.photobucket.com/albums/z190/born2ride4/da50cda3.jpg

[Jason Hall]

It's kinda hard to tell how much room you have because of the angle of the pic. I have used the YFZ450 boot on some custom builds. Looks to me like you could use a yfz, or a TRX250R boot??? I guess It depends on If you need to fit the boot around the side of the shock. Where Is the shock? A ATC250r boot has a big Indent really close to where your frame gets In the way. I know the carb diameter on the 250R will be bigger, but maybe with a piece of thin walled pipe and a nice hose It could be made to work. Can you rotate the front boot slightly to change the angle of the carb? You could build a airbox to fit the YFZ, or TRX boot.