PDA

View Full Version : 05/06+ entire Intake conversion ?



Lquad71
09-12-2010, 09:58 PM
Instead of getting just the adaptor for the fcr carb going to the rest of the 05 intake, can i just get the entire 06+ intake system(air box, filter, etc.)?

What is the same on the two different models intake so that i wouldnt need to buy a duplicate?boot from the carb to the motor?

eastside 400
09-13-2010, 07:52 PM
you can use the whole 06+ airbox assembly, only 2 bolts will line up but it works fine like that. You can use the 05 boot to the head but the size inside is a little different, you can port match it if you care. im not sure if the 06 one will work to the head

antwanrttg
09-16-2010, 11:12 AM
I'll sell you EVERYTHING you need to do this. 07 TRX450ER carb, brand new intake tube(carb to airbox), brand new Moto-Xperts intake kit (custom plastic insert, brand new no toil air filter), and a used airbox.

$215 shipped for everything.

Lquad71
09-17-2010, 08:34 AM
There is electrical wires coming off of my 05 carb and will it still work fine if i use the FCR? does it have wires also?

And if it is a trx450er then will it still work if mine is a 05 that isnt ER?

antwanrttg
09-17-2010, 10:26 AM
You will use the plug off of your 04-45 carb and put it on the FCR.

http://www.trx450r.org/forum/118-engine-tech-faq/89024-fcr-tps-wiring-cross-reference.html

As far as ER to R, you will no longer have a hot start. BUT there is a way to add one as well, I just can't find the thread.