PDA

View Full Version : Parting out motor with busted left case



JM317
09-12-2010, 11:14 AM
I have what I believe is an 86 bottom end with a busted left case from a throw chain that I'm parting out along with a ported stock cylinder and 86 stock head. The cylinder is what I believe to be an 88 and looks to have plenty of room for bores with no gouging on scratches in the cylinder walls. The porting was done by a shop out of Tuscaloosa, AL and has their name engraved on the cylinder "Big Eagle Cycles" along with the date and what looks like the persons last name. It looks to be a pretty clean job with the transfers done and all too. I also have a new Pro-X piston that is labeled "CR25088" and is .030 over and it appears that the cylinder would have to be bored to fit this piston once rings were installed. If anyone is needing anything in particular, please let me know and I'll see if I have it and we can go from there. I have most of the bottom end minus the clutch hub and basket. I need rod measurements to tell if this OEM crank is long or short BTW.

JM317
09-12-2010, 11:55 AM
I'm also interested in trades for a stock 88 swingarm and stock 88 steering stem.

Honda5
09-12-2010, 04:52 PM
Not Looking for any motor parts but I have a stem that is in perfect shape it was just pc'd the oem black color that the motors were done in and I have a lonestar swingarm.

JM317
09-12-2010, 05:41 PM
Let me know what you're asking for the stem and when I sell some of this stuff I may get back to you.

blacknblue#2
09-13-2010, 08:04 AM
is the sprocket shaft any good?? how much for that, im very interested.

JM317
09-13-2010, 08:42 AM
Originally posted by blacknblue#2
is the sprocket shaft any good?? how much for that, im very interested.

I'll look the sprocket shaft over really good, I believe it's in good shape. Just shoot me an offer, I have no idea what half of this stuff is going for.

blacknblue#2
09-13-2010, 10:07 AM
I PMed you an offer. keep in touch man. Thanks.

JM317
09-13-2010, 11:46 AM
Originally posted by blacknblue#2
I PMed you an offer. keep in touch man. Thanks.

PM returned.

JM317
09-14-2010, 09:44 AM
Sprocket shaft sold, I still have all the other transmission parts and most other engine parts if anyone is needing anything.