View Full Version : jetting help
muddzilla94
09-04-2010, 11:02 PM
need some tips for jettingi have a race saturday, i have a 04 450 with a sparks mx cam, porting, full system exhaust, and airbox lid off at 2500ft above sea level
muddzilla94
09-05-2010, 07:49 PM
anybody?
50 pilot, 180 main, clip one position down from center and 2.5 turns out on the fuel screw would be a good starting point.
muddzilla94
09-05-2010, 08:44 PM
i have a 180 main and a 50 pilot but stock needle with 2 turns out on a/f screw and its running like its flooding out around 1/4 throttle.
DnB_racing
09-06-2010, 02:33 PM
Pilot jet: Controls 0 to 1/4 throttle. If your engine cuts out or pops when you rev it up then you need to make this richer (higher number) if it bogs like a false rev limit when you rev it up you need to make this leaner (lower number).
muddzilla94
09-06-2010, 04:11 PM
i meant to say it sounds like its bogging, ill put up a vid and show you all what its doing.
DnB_racing
09-06-2010, 05:46 PM
check through this link it should help with pilot and a/f adjustment
http://www.exriders.com/vbb/showthread.php?s=&threadid=229923
muddzilla94
09-07-2010, 02:34 PM
thanks i got it lined out with the a/f screw.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.