Walsh Race Crafts New Products for 450R

[JNWQUADMX]

Whats up everyone?
This is Jeff From WalshRC. Just wanted to give you guys a look at my TRX That I built. It has a Walsh lowering kit that lowers the quads center of gravity to prevent 2 wheeling and provide precise cornering. It consists of a lower adjustable sub, not the reg adj sub, an aluminum gas tank that is lower in the chassis, we drop all the bodywork and lower the radiator to centralize the weight. In the rear is an EZ25:17 swingarm and link along with Walsh billet fender brackets to replace the stockers that break all the time. the front end is a new set up that uses the LTR450 Spindles and hubs, with LTR style tie rods, Adjustable stem bottom for turning radius as well as less bump steer. This Front end Has like no bump steer and is straight up sick, the bike also uses Fox shocks with an RPM axle and carrier.and has a Walsh Huge intake for the TRX. the engine is a full race build with a CRF450 ignition and carb with a billet oversize Walsh Fuel nut to help stop the fcr stumble. Slipper clutch and Dasa exhaust. i plan on entering it in the next quad of the month so well see what happens. Well check it out and if you have any questions about anything feel free to pm me.

[JNWQUADMX]

2

[JNWQUADMX]

3

[JNWQUADMX]

4

[JNWQUADMX]

5

[JNWQUADMX]

6

[JNWQUADMX]

7

[JNWQUADMX]

8

[JNWQUADMX]

9

[JNWQUADMX]

10

[JNWQUADMX]

11

[JNWQUADMX]

12

[laeger2fiddyr]

I know its a pain but can we see pics of the bike w/o plastics? I would like to see what has to be done to the frame. Nothing hits? Like the silencer on the antifade or the pipe on the back of the motor? It just looks like it would be a pain to install. The quad looks sick Jeff!!

[Chino886]

Nice build! I did not see the aluminum tank, looks like plastic to me? Am I missing something?

[JNWQUADMX]

The exhaust stays in the same spot. There is a new tab mount on the grab bar. The kit comes with tabs that weld onto the upper rad mount to lower the rad and front plastic, new inner front plastic mounts that bolt onto the frame, tabs to hold the back of aluminum tank that is rubber mounted in front and rear, new front tank rubber mount tabs that bolt to the tank, you have to move lower rad tabs lower in the frame, new aluminum fuel tank that uses the 08+ tank cover, subframe and exhaust mounts, as well as optional zues tabs to hold the front of rear fenders. Look close and you can tell. Nothing hits at all. I made detailed instructions that are step by step for instalation. It's very easy. You don't even have to take apart the bike to install. Just the plastic, tank and rad, airbox and exhaust. As well as sub to switch. Uses stock fuel petcock. Byrd, denoble and upperman along with other national racers ran this kit this year. It's the only way to make the Honda corner and ride like it's on rails.. It is a huge diff and is amazing. The kit retails for $1400. Which is a killer deal.

[Ellingsoc26]

That looks sweet! when i can afford it i want to get one!

[laeger2fiddyr]

How much moding to the plastic do you have to do?

[Ellingsoc26]

How much do the hubs and spindles run ya as well?

[JNWQUADMX]

you have to fit the plastic for a good clean tight fit. if you look close you can see what is needed. the LTR front end uses diff arms and stem then the std Walsh honda front end. you are responsibe for buying the hubs and spindles.

[Ellingsoc26]

Crap u need diff a arms too! O well haha what a arms do you run on then?

[tach13]

thats a sweet quad! nice to see u guys still innovating.

[Lquad71]

Is this like josh uppermans bike during the beginning of the 2010 season? i remember right before they put on the subframe it had a weird bend in it. i think i heard walsh made it. and he had and aluminum tank. It just has the cover right? really cool bike. just wanted to know if this was like uppermans bike?

[lilguy450]

I'm interested in the walsh fcr fuel nut? What does it do and how much?

[ridersonline]

Your exhaust wrap is on backward. :D

[JNWQUADMX]

yes it is the same thing. The fuel nut is like 50 and it holds alot more fuel around the main jet to keep fuel from sloshing away from the Jet on a rough track and g-outs. its also has cooling fins to help keep the fuel cooler. and yeah it prob is on backwards, lol but it works for me and never comes undone. ive always done it like that, but what can i say, lol i guess i love to do things *** backwards sometimes.

[ridersonline]

Everybody was sucking so hard on your butoody I had to give you some grief... LOL

Nice bike though !

[JNWQUADMX]

lol! no prob bro,

[Zryder85]

So is the lowering kit 1400? Or does that include arms and all. I'm guessing you need to use the ltr brake calipers too??

[JNWQUADMX]

the lowering kit is 1400. the front end is like 1500, stem is like 300. spindles and hubs are on you. I think some of the ATVRIDERS sponsors sell Walsh. they can prob give you some kind of deal. thanks

[RobRacing]

When will all these product be available? Thats a sick quad man!!!

[jason_david1]

are those ltr a arms just on a trx or what is different about them? ive read that you can put ltr arms on a honda

[JNWQUADMX]

all products are available now. No the front ends are diff. this is a custom TRX front end and stem set up to use ltr spindles and hubs. the arms and stem and tie rods must be used together

[Black Sheep]

I'm interested in the rear subframe. Did I read correctly that this is a differant item than the adjustable subframe Walsh already offers? If so what all is involved in just lowering the rear/subframe? Just the frame itself?

[DEVINF450R]

I see what I am gonna purchase this winter if Walsh accepts my sponsorship request

[JNWQUADMX]

the sub is alot diff then our standard adjustable sub. the rails and mounts are all in dif locations. our std adjustable sub is perfect for those who want to lower seat hight and get lower. but for the performance of the lowering kit everything in the kit is needed to work together.

[Black Sheep]

Thanks for the info But, i doubt the rest of the "package" would work for me...lol...I think your new sub frame would be a perfect set up for our race trikes. http://i238.photobucket.com/albums/ff223/motomanimal32/TPC/100_7966.jpg

[JNWQUADMX]

i know. thats why i sent you a pm bro. lol i love ATC;s.

[KEVIN132]

that ATC IS AWESOME!!!

on kit though. jason conell races with us in NEATV has the kit its very sik and the bike is def on rails!!

walsh is def the best. i use to run houser elka still better than stock but man my bike is soo much better now!

[Black Sheep]

Originally posted by JNWQUADMX
i know. thats why i sent you a pm bro. lol i love ATC;s.

Yeah I saw that after I posted. :cool:

[Lquad71]

What kind of anti fade is that?
Oh and what kind of nerf bars are those.i really like them

[HurleyBraaap]

props for repping Lewis Atv!! thats a sick quad! hopefuly my Honda 450 will look like that someday!

[quad2xtreme]

Love everything about the build...except for the 2 Precision stickers...very distracting. ;)

[Lquad71]

so does anyone have any idea on what kind of nerfs those are?

[Balaz_73*00]

^Rath Series 44^

[Ex_Rider43]

no theyre DG.

nice trx !

[MX450]

sick trx

what about the calipers? do the honda brakes mount up to the LTR spindles?

[DEVINF450R]

No ltr brakes must be used for now but they said they are developing a relocation plate to use honda brakes. it has a retail price of $1200 for the LTR spindles, hubs, and brakes system. so im guessing that means they will be available through walsh.

I have a question about this system, I seen that you will be able to convert the Flow 34 front end to this for 880, does this mean that my current front shocks will work with this new front end?

[pickard_47]

Just put the lowering kit on friday night and rode it monday for the first time.......all i can say is that its amazing!!! best thing ive spent that much money on in a long time. Definitely worth it

[pickard_47]

.

[Scro]

Did you guys notice a big difference in bar height after installing the lowering kit?

[pickard_47]

yea i did at first but since it doesnt change how it feels when you stand i just left it alone.

[eastside 400]

your bar height wont change unless you put a different stem on with it. your not changing any suspension parts with the kit, the seat and grab bar will be lower but not the bars

[pickard_47]

Ya I know its not gunna lower the bars obviously but it does lower the plastics and everything enough that it makes the bars feel higher than usual. All I was getting at was that I like how my bike feels when I stand up because its what I'm use to so I left it alone. But the lowering kit makes it handle 1000 times better

[motomadman]

Your running a Laeger Tpin not a walsh front end?

[pickard_47]

Yea, no offense ro walsh but laegers hooked me up good and walsh didn't.

hey man can you take a pic of your bike with the plastics off? im very interested in the tank on this thing and how it fits. if not i understand its a lot of work. also if you take the plastics off take a bunch of pics. id like to see everything thats involved with the lowering kit.

thanks man

hope you can help me out.






Originally posted by pickard_47
Yea, no offense ro walsh but laegers hooked me up good and walsh didn't.

[JNWQUADMX]

ID sell it for 11k cash.

[JNWQUADMX]

deal fell through. still for sale

[JNWQUADMX]

bump

[mx Eli]

could sombody take some pictures of this kit with that plastics off so we could see all what is involved with alll the brackets and how it goes together

the pictures would be greatly appreciated by me and roostar

[D Bergstrom]

Originally posted by mx Eli
could sombody take some pictures of this kit with that plastics off so we could see all what is involved with alll the brackets and how it goes together


I could go for some pics also. There is a pic of just the parts on Walsh's site, but would like to see how it all goes together.

Also, what is the capacity of the new aluminum gas tank? I am guessing it is less then stock, just wondering by how much.

Doug

[JNWQUADMX]

Quad is up for sale. Like new and ready to race and win in Any GNC mx class. True Pro level race bike.

[mx Eli]

if anybody wants pictures like i did there is a guy selling his kit in the fs section and he has some pics up of the uqad without plastics. they arnt the best but will give you an idea

[gnhmoto]

can we see some pics of it with the red plastics?

[JNWQUADMX]

it has new black and white on it now. i have new red to go with it as well. same graphics, just red white and black