Laeger Decals

[troybilt]

Does anyone have any of the older Laeger decals? Preferably in white? I need 2 for my frame and 2 for the swinger.

Thanks,
Troy

[croat1]

i need some also. last time i talked to scott taylor all he had was the black decals.

[danhung11]

I have the newer style, perhaps we can get some made like the older style???

You know of any graphics guys in town?

[croat1]

dan/troy: i would be more than willing to split the costs with you guys to get some laeger decals in white and red. i will call scott mon/tues and see if he will have some made.

[brokenbones]

troy

I have some white ones but how due i tell if there are the old style

let me know

these were the ones i was giving several years back when my protrax was rebuilt

[troybilt]

I believe, (correct me if I'm wrong Dan), they were individual letters that you pulled the backing off then stick them and they were held together by the top layer that was peeled off after sticking them. Does that make sense?

[troybilt]

Originally posted by danhung11
I have the newer style, perhaps we can get some made like the older style???

You know of any graphics guys in town?

Dan, yeah I know some graphics guys in town. We'd just have to get Laeger's permission to reprint them though. Usually not a problem. I don't know how Scott is.

[brokenbones]

troy

mine peel off the back and say laeger's, but the top layer stays on with a clear protective layer over the white letters

[troybilt]

I think this pic from Dan shows the two styles...

[troybilt]

Originally posted by brokenbones
troy

mine peel off the back and say laeger's, but the top layer stays on with a clear protective layer over the white letters

Regardless old or new, would you sell the white ones?? Thanks, Troy

[troybilt]

Hey, I found these:

http://www.motocrossdecals.co.uk/decals-motocross-quad-bike-aftermarket-logos/laeger-vinyl-decal/prod_69.html

[croat1]

troy: i just sent scott taylor an email asking for style/colors/pricing.

[troybilt]

Thanks Joe. Hopefully he'll get some for us!

[250Renvy]

Originally posted by croat1
troy: i just sent scott taylor an email asking for style/colors/pricing.

If you can find out the sizes for frame, swingarm, a-arms.

Or is somebody has some knowledge of the size, I know I can just get some made here for cheap.

[emullen]

here was Scotts's answer a few months ago

"Eric we do not supply stickers for rebuilds sorry. There are just tooooo many Laeger’s a-arms out there to continue to put new stickers on each one every time they are powder coated. We use to say send us a self addressed stamped envelope, but after our annual sticker budget got spent in 2 months we had to stop. People just don’t realize how much stickers cost when you have thousands of request. We now sell sticker sheets for $10 each which are a 9” x 11” sheet in either white or black. I hope you can understand"

Understandable- I never did buy the stickers and not sure if they are a arm only for $10 I was looking for all of them - a arms, frame and s arm I decided (since I am cheap - lol) to just keep the bike sticker free since it will likely be torn down and maybe powdercoted again after the season. I will consider putting stickers on if they are free and the person/company has helped me which Scott has or if I get a discount/ sponsor as one company stated they would provide if I run their sticker kit.

good luck Troy, I do believe the stickers make it look a bit more complete and break up some of the paint/chrome and gives it that new look when they are placed on fresh pc parts

[1promodfan]

I just took my a-arms to a local sign shop and had some made.

[89trx250r]

lol guys i have a vinyl printer... i also have 20+ colors of vinyl as long as i can find the original logo to copy in and then scale them differently per part im glad i saw this thread being as i was planning on doing this for my rebuild this winter :) so let me know if youve got interest and ill try and fish up a logo in the mean time ill post pics of some trial runs...

[pdxbigfoot]

The style of decal you are looking for is called a diecut. Any Signs Now or a shop with a vinyl potter should be able to do a run for you fairly inexpensive.

I have had various decals done from JPG's and I think the most I ever paid for them was $4.50 each when I ordered 10 lots. Those were also fairly good sized 6.5X12"

[troybilt]

I'm still pretty sure you have to have written permission to have the graphics made. I might be all wet on that but that's what I as told awhile back when I was designing my own graphics for my 250r... at least that was what someone said about the Honda logo.

I have no problem paying for them from Scott. I just wanted the older die cut versions in white... I'd even buy some for spares as well.

Like Dan mentioned the die cut ones hold up much better than the newer ones...

[croat1]

i fugured that is going to be be scott taylors reponse (emullens response). way to go scott taylor. great job promoting the business. too cheap to supply stickers.

well i went to the source ...i just sent mark laeger an email asking about a few things. i did mention the laeger decals. waiting for a response. maybe he has some stashed away?

[89trx250r]

hmm alright well ill be printing some tonight being as i found the logo and stop calling them die cuts please there called vinyl stickers.... Ive printed numerous designs that can get pretty intricate for friends and other larger snowboarding companies so i dont see why this would be a problem and yes i could see honda saying something like you need permission lol but idk if there gonna send honda reps out to everyones house and ask if they legitimately got the stickers through honda... so ill be sitting on a stack of probbly 150 tonight in 15 colors...

p.s. ive measured the dimensions of the lettering on my aarms frame and swingarm so i will be printing the proper sizes.

[pdxbigfoot]

Oppps! Now I know.
Vinyl decals it is.

[250Renvy]

Originally posted by 89trx250r


p.s. ive measured the dimensions of the lettering on my aarms frame and swingarm so i will be printing the proper sizes.


I would like some in the following if you are going to do it. Please let me know prices before though.

Swingarm - both sides in Red and Blue
A-arms - both sides in Black and Blue
Frame - Both sides x 2 in white

[89trx250r]

here is something ive done recently thats more on the intricate side they were for a company called snowboard revolution.

ill post pics tonight of a few sample runs so you guys can let me know what you think and as far as price i havent decided yet mabye like .50$ a sticker in all honesty youd be paying for me to get carpel tunnel peeling all the little e's and a's and mabye a small portion of the vinyl cost heres the 3m site i have an assortment of about 20 colors of the 57 total (parents started to ask why i needed so many rolls lol)

http://store.gregory1.com/vdetail.aspx?1F000010050

[89trx250r]

p.s. i meant 50 cents not 50 dollars sorry

[croat1]

i need:

swing arm both side in red and black x 2
frame both sides in white and black x2
a arms both sides in red and black x2

[troybilt]

I need:

Frame x4, 2-white, 2 black
Swingarm x4, 2 white, 2 black
Aarms x4, 2 white, 2 black

Thank you,
Troy

[croat1]

89trx250r: any samples?

troy: scott was on vacation. just sent an email for me to calll him.

[troybilt]

Thanks Joe for the update... I'm losing faith in Scott.. LOL!

[89trx250r]

sorry yea i was having trouble with the l under the g i found out my needle was getting dull so i order'd a new one sorry its taking longer then expected guys im not tryin to let anyone down :(

[troybilt]

Any updates? I need stickers!! LOL!!

[croat1]

any news?

[troybilt]

x2 I'm ready for the decals!

Joe, what did Scott tell you when you emailed him?

[croat1]

troy:
in scotts email he said he had varous size stickers on a 8 1/2 x 11 sheet available in black or white. $10 per sheet.

i don't think he understood what stickers (decals) we are looking for. these are probably the ones that you would put on the fenders and not on the a arms, frame and swingarm.

i'm going to try and call scott as soon as i get a chance

[fastredrider44]

Hey fellas, I just caught wind of this thread. I make the stickers all the time for our local powdercoater. He powdercoats a bottom color, applies a sticker, powders over that, peels sticker off, and powders clear over that. I said all that to say this. The stickers are a breeze to make. A local sign shop should be able to make them cheap, or hit me up and I'll see if I can help you out. Let the records show I'm not trying to advertise, just help some R nuts out with some stickers.:blah:

[croat1]

^^^thanks. we have talked about this before but the thread was deleted

[troybilt]

I would have never thought getting replacement Laeger vinyls would be this difficult!! sheesh....

[fastredrider44]

Originally posted by croat1
^^^thanks. we have talked about this before but the thread was deleted

Yep. That's why I usually don't bother to respond to sticker threads. But people usually aren't looking this long and desperate for some stickers. lol

[my88r]

I have 2 black laeger decals. The new style will send for free. Need Addy??

[troybilt]

I can pay for the stamp... :D

I'll PM ya.

[croat1]

i guess i can ask one more time...any updates.

[MANIAK 88R]

Not sure if you found what you are looking for yet but I have a local guy that does quad graphics. I had him do some lettering for our trucks and he does really good work. I had talked to him about Laeger graphics for my bike and he said he can do anything like that. His name is Cody, his website is www.fourtechind.com. The phone number is 559-901-8774 I am sure if you haven't found what your looking for yet, he either has them or can get them.....MJ

[fastredrider44]

I fixed figair up with some. He can tell you I'm not looking to get rich off of them.:o

[312R1]

Originally posted by troybilt
Any updates? I need stickers!! LOL!!


Troy,

I have some stickers I'll send with the front end.

-Steve

[troybilt]

Awesome thanks Steve!!

[tritty_wall]

fastredrider44 can you still get stickers? I need 2 white swingarm (1 For each side) 2 black for frame (each side), and 2 black A-arms (Each side). PM me with prices, Thanks

[croat1]

fastredrider44....sent you an email

[C41Xracer]

i need white stickers for 2 frames and white stickers for a swingarm

[tritty_wall]

Got some stickers from fastredrider44 they look great and very good price. Thanks

[schiavo250r]

Guys if someone sends me an old one I can make them in a variety of colors. My friend has the machine and vinyl.

[troybilt]

I've got sets of the new ones if you can scan them in... I'd personally take several sets of the vinyl ones...

[fastredrider44]

PM me what you want and I'll give you the scoop. Are you wanting old style/new style, color and ...

[DnB_racing]

fastredrider I sent you a pm regarding leager stickers

[fastredrider44]

Originally posted by DnB_racing
fastredrider I sent you a pm regarding leager stickers

PM box full

[DnB_racing]

Originally posted by fastredrider44
PM box full cleaned out the pm box thanks

[stever250r]

Did you guys figure out a way to get these decals?

It looks like Fastredrider44 was able to print some...

Looks like I will be needing some of the old style now...

2 for Frame

2 for Swingarm

2 for A-arms..

I sent Fastredrider a PM...

Just wanted to see if this was the route that everyone else ended up taking...

[troybilt]

Yes that's the route I went... work pretty good, but stay away from a textured powder, I had to sand my frame where I mounted the decals cause the texture wouldn't allow them to stick very welll...

[stever250r]

Great... Thanks Troy.

[socal]

Ordered mine a few days ago,cant wait to get em.Great customer service!!!

[973trx250r87]

Waiting on mine to come. I feel like ralphy in a christmas story with the secret decoder pin!

[250Renvy]

Are these still available? If not, does anybody have the dimensions of the a-arm, swingarm and frame decals?

I'll just get some die cuts made?

Any advice on type of vynil thickness or stick to get them to work best in a harsh environment like a-arms and swingarms?

[dustinshuler]

Im fixxing to have some made! If youll give me an adress Ill send you a few.

[250Renvy]

Are you getting die cut? I have a set on my a-arms now that are the newer style and they aren't great. I was also thinking of getting gold ones made so not sure you can get those or not.

[dustinshuler]

Die cut. only getting white,black,blue and red!

[ryanowarrior]

Anybody still have any of these? I need some white ones..

[dustinshuler]

call me ryan I think i have a few and i still am going to atlanta this weekend for the supercross so we need to meet anyway on the other stuff

[kt23]

I still have several if anybody wants them.

[troybilt]

I need 2 white ones if any body has them. The medium sized ones that usually go on the aarms.

[danhung11]

I have quite a few, Troy.

[troybilt]

Originally posted by danhung11
I have quite a few, Troy.

You're the man Dan!! thanks...

[250Renvy]

I just had some made in gold. If anybody wants some in other colors let me know.

I don't know price on other colors but I think I got robbed at $7 a piece for die cut - not sure if it's because it was on gold metallic or the fact that it was a rush job, but somebody please tell me they paid wayyy less than that for them.

[45 lt80]

Dan. Do you have any medium black for a-arm? Thank you Paul

[number5]

Got these in the mail today from fastredrider44 $12
shipped! bam

[ysf250r]

Does anyone have these in white or black for swing arm? Let me know thanks ysf250r@yahoo.com.
thanks

[45 lt80]

I am looking for some black one for my a-arms.
Thank u
Paul