PDA

View Full Version : 250r tapered bearing carrier ID


hotrodlincoln
08-26-2010, 08:23 PM
Hey guys-need some help ID ing this aftermarket tapered bearing carrier from my newly acquired 250r- It has tapered bearings, a grease fitting in the middle. I contacted RPM and they said it was not theirs- Any ideas where to get tapered bearings or who might have made one? thanks!
hotrodlincoln
08-26-2010, 08:24 PM
another pic
atv fan 28
08-26-2010, 08:42 PM
Get your old bearing out, and take it to your local auto parts store. They should be able to match it up. I got my bearings from Advance.
hotrodlincoln
08-26-2010, 08:46 PM
I think the seals are trashed...where can you buy those?
atv fan 28
08-26-2010, 08:48 PM
Your parts store should have those also.
86 Quad R
08-26-2010, 08:56 PM
Originally posted by atv fan 28
Get your old bearing out, and take it to your local auto parts store. They should be able to match it up. I got my bearings from Advance.

X's 2

do the seals have numbers on them? may be able to cross reference those aswell.... if not and if the parts guy is good, he should be able to measure them and set you up with the correct ones.

btw: to my knowledge. all tapered bearing masnufacturers use the same bearing. and seals.
atv fan 28
08-26-2010, 09:11 PM
The seals are 52-68-8. I dont have the bearing numbers, i threw the old bearings away.
atv fan 28
08-26-2010, 09:17 PM
The bearing # should be 32008X. Thats what mine is.
aztecgwynn
08-27-2010, 12:24 AM
Try magic racing.com & rad mfg what I did was went to the timken bearing store with carrier and bearing and they had everything I needed
hotrodlincoln
08-27-2010, 05:24 AM
atv fan- the bear is exactly 32008x where did you find it and the seal- ??thanks
atv fan 28
08-27-2010, 10:54 AM
Originally posted by hotrodlincoln
atv fan- the bear is exactly 32008x where did you find it and the seal- ??thanks

I got my bearings ans seals from Advance Auto Parts.
Dave83
08-27-2010, 10:58 AM
Looks like a RPM Millenium carrier possibly
86 Quad R
08-29-2010, 08:53 AM
Originally posted by atv fan 28
I got my bearings ans seals from Advance Auto Parts.


as did i. as i recall(been awhile). i stumbled across one of the old bearing and the number is a 32008xm and is located on the wider egde of the race(the portion pressed into the carrier) as they are sold. race and bearing as a kit. :cool:
spintly
09-02-2010, 10:42 AM
Is there any writing on the outside of the adjuster holes? Mine is from RAD manufacturing and it says Magnum 22 on the left side.