Old plastics look like new

[lasher45]

I have a set of Maier (sp?) Plastics for my 250r with a One Industries graphics kit. There matte black and the graphis/seat cover are black and blue. I'm looking for something that will make them look new again. There's the usual scratches, marks etc... but is there anything I can do to make them look better?

[Rootar]

if you take the time to properly prep and use PC racing plastic renew then they will look new, BUT once you do it you need to be careful not to spill gas on them because it will eat through the PC finish. and cleaning with harsh chemical can dull the finish, do it right and take your time and try to only clean with soap and water and youll be really happy with the results.

[lasher45]

Can I buy it at normal auto stores or do I have to order it online?

[DnB_racing]

around me the auto stores dont have plastic renew but the local bike/quad shop does! Ive used a vinal floor polish with good results! just cant pressure wash it or it will come off

[DnB_racing]

I did this red parts and it lasted about a month.. they were real dull and scrstched

[finsteratv]

Originally posted by DnB_racing
around me the auto stores dont have plastic renew but the local bike/quad shop does! Ive used a vinal floor polish with good results! just cant pressure wash it or it will come off

i tried that and it came out pretty nice for me to

[Rootar]

most dealer ships have it actually, atleast the ones that ive been to.

[trx310R#24]

how new?

heres what i can do :p

edit: wrong pic =p

http://i36.photobucket.com/albums/e16/asm43101/TRGRTG.png

[trx310R#24]

wet sand then buff with a buffer then wax 3 times ;) you will have newer then new plastics.