clutch/gears

[bansheeboyo]

hi
banshee not getting all the gears
took case off seen the screw for gear shift was broken
got new 1 and new clutch but now dose not get any gears
any ideas

[methyman]

That screw is an eccentric. Put the transmission in second gear and adjust the screw so the jaws of the shift shaft are equal to the pins on the shift star. Then tighten down the nut and double check it. It should shift good after that. I suggest you take the clutch basket off so you can get access to the screw and see the claw of the shift shaft.