Housers new XC Nerfs

[Pappy]

Laid eye's on them today.

[Pappy]

.

[m0t0xk1d]

those things are SICK. but maybe the end piece would get hung up on some tires? is there an advantage to those?

[wild250rman]

Are they available yet and any idea on the price?

[juice420]

I don't even wanna know how much they cost.

[Scro]

That's sort of what a normal set of nerfbars looks like on my machine after a race. I knew I should have put a patent on that design.:p Those look like they will hold up a little better, but mine also bend at the front mount. If they were to make a support bar going from the frame, right in front of the Tag skid emblem, to the nerfbar close to where the first net mounts, it would definitely be a solid product.

[krt400ex]

Originally posted by juice420
I don't even wanna know how much they cost.

i believe i saw on another thread they are $400 or $450? very very expensive. and they arent available for everything yet.

[quad2xtreme]

the key to these is they have shock absorption much like flexx bars.

[Pappy]

I dont believe these have the shock system. These are another new design

[wild250rman]

Looked on their web site and they are not listed yet any ideas when?

[juice420]

Originally posted by Pappy
I dont believe these have the shock system. These are another new design
Yeh, I was gonna say I don't see any "movable" parts on these.

[quadmom110]

Here is the link and it does talk about the shock absorber.
https://www.houser-racing.com/WSWrapper.jsp?mypage=video/Store_Nerf_Bars_2010.htm

[Pappy]

These are NOT the shock system nerfs like Goodman has been running...these are brand newNEW style for XC. Infact they just did the photoshoot for them last week with this very quad

[wild250rman]

Originally posted by Pappy
These are NOT the shock system nerfs like Goodman has been running...these are brand newNEW style for XC. Infact they just did the photoshoot for them last week with this very quad
any insight into how they done? looks like they will be a nice new twist to nerf bars.Looks like you might be able to reach the ground with your feet to back up if needed on quads with no reverse.

[honda400ex2003]

looks sweet to me. i wish i had a 450 or they make them for the hundy. steve

[SRH]

call me old fashion but im still into the std bolt on ac nerfs....ive been hit hard enough to bend them ..unbolt ...new pair for 140 and no sweat...id b e quite upset messing up $500 nerfs

[coryatver]

are the ones in the pic bent or are they sopposed to be like that?

[Pappy]

Ok here is what I know, and im sorry for not spilling the beans earlier, im just swamped after a national..


These were built and tested and finally released to one of Housers XC Pro Am racers. The bend is for allowing a rider to use the nerf to scrub off a tree when turning. If youve ever raced tight stuff, you know exactly what the goal is here. Its the reason many nerfs end up with this bend haha, but this one looks to be fully intentional:p

The angle of the picture from above makes it appear the one bar extends close to the tire but there is a fair mount of room. The 20 inch rears had plenty of clearence.

They also sweep "UP" above the plane of the lower frame rails as you can see in the pic.

I will have some rider feedback shortly but thats all I know.

[Pappy]

Originally posted by SRH
call me old fashion but im still into the std bolt on ac nerfs....ive been hit hard enough to bend them ..unbolt ...new pair for 140 and no sweat...id b e quite upset messing up $500 nerfs

We have been running Tusk for that very reason. I can not afford the high dollar stuff for XC but understand some of the new stuff coming out may actually work and coudl be worth the extra coin.

Our REM nerfs are starting to resemble the new Housers LOL, upsweep and all!

[quad2xtreme]

Originally posted by Pappy


Our REM nerfs are starting to resemble the new Housers LOL, upsweep and all!

Maybe a new business ooportunity. Cody forms them for you and then you add powdercoat and put on some pretty stickers. $375 ;)

[Pappy]

Cody already started telling me how we can do a shoot to show how to pivot off a tree:p I told him thats fine...when either we start getting nerfs for free or he gets a better job so he can pay for them LOL:p

[ohioEX]

To quickly answer some questions, I will give out some info.

These were built for and tested by Eric Hoyland for XC Racing
They will be a Production Nerf Bar available for most performance quads.
They DO include the Suspension Foot Pegs.
They are designed to be used to pivot around trees.
Pricing is around $475

Call Houser Racing for more info.

877-646-3278

Thanks, Mark @ Houser

[Pappy]

Mark..did you all change the adjuster or does this set not feature the shock system...I dont see the adjuster on these..

[PhilMoore]

Them are some sexy nerfs. :cool:

Unfortunately, the only quad I have without nerfs is a Banshee, and I fear they won't make a set for that lol. Pretty sure those nerfs would look awesome on a Banshee though...

Gonna be upset if I hafta get a Yfz to put them on.

[ohioEX]

Pappy - The pivot Bolt is right near the white kick up extension on the peg. The Preload Bolt is in the last triangle closest to the frame mount. It's kind of hard to see in the picture, but it's there!

PhilMoore - We have never made products for the Banshee, if there is a demand for them, we will consider it.

Thanks, Mark @ Houser

[Pappy]

Gotcha Mark....Thats what was throwing me!

[PhilMoore]

PhilMoore - We have never made products for the Banshee, if there is a demand for them, we will consider it.

Thanks, Mark @ Houser

Banshee is dying, and not a woods quad anyway. LoL However, those are some sick looking nerfs and some of us just like to make cool looking quads. We don't actually ride them XC. lol

[lwrider20]

correct me if im wrong but dont most rule books state that all nerf bars and bumpers cannot have any open ends and must be a loop style?

[Pappy]

Originally posted by lwrider20
correct me if im wrong but dont most rule books state that all nerf bars and bumpers cannot have any open ends and must be a loop style?

I dont believe they exist for XC....some of the bumpers being run there are spooky!

[ohioEX]

We (Houser Racing) have been in contact with the ATVA. They have checked out the Nerf Bars and said they are completly LEGAL for racing.

They have no sharp points and the end of the large tubing near the rear tires have plugs welded into them.

Just wanted to let everyone know that saw the post further up the page.

[Pappy]

I caught back up with Eric Hoyland to see how they have been doing seeing they had Somerset and Snowshoe on them, both notorious venues for destroying equipment.

Other then some normal wear and tear, looks to be holding up pretty good

[Smoker]

Granted, it's a good idea but I've nerfed the hell out of some trees with my AC's and I'm guessing they all bouce off about the same. Sure I don't have squishy rubber balls under the peg but I haven't broken my feet off yet, lol.

[304racing]

Well guys I will actually go out on a limb and say it " I think Houser Racing has done the impossible designed an XC Racing Nerf Bar that can withstand an entire GNCC racing season" Eric Hoyland GNCC Racer # 17 has put alot of effort into trying to test this product both at the nationals and locals all up and down the east coast and we are still running the same set that we started with at the Millfied GNCC. Now the only thing i can say is there is a 4 inch area that has lost it's powdercoat on the very outside edge. They made the Footpeg tree out of the same material they make there a-arms out of and it has not broke,bent,or even the net mounts have'nt smashed in like some of the other product's on the market we have ran in the past 6 yrs. Houser Racing is getting bombarded with orders so be patient, and wait , it is definitely worth it in the long run. I believe there price is $450.00 plus shipping way less then some other systems you have bought in the past. Try them you wont be disappointed.

[Ichoptop]

Originally posted by Smoker
Granted, it's a good idea but I've nerfed the hell out of some trees with my AC's and I'm guessing they all bouce off about the same. Sure I don't have squishy rubber balls under the peg but I haven't broken my feet off yet, lol.


agreed, they are pretty and most likely very well built but 5 bills isnt cost effective to me.
I have had my blingstars for two years and have gashes in them from trees and rocks and I still have feet. An extra $250 bucks for them because they are pretty isnt worth the price.

[quad2xtreme]

anyone know if 22" tires can be run with these on a Honda 450r?

[304racing]

Eric ran 22's at millfield,snowshoe,and two different extreme dirt series races on the yamaha and nerver had any issues with them hitting,Houser also shorten that section of bar anyway about another 1 or 2 inches and I would think you would be fine. remember this is a new product and there is no one better than houser to deal with if something isnt right just call and talk to them they actually listen. Good Luck.

[304racing]

ICHOPTOP you are correct in saying they are not cost effective to you but to someone who is racing alot and is replacing all the stock componets anyway it is actually saving about 200 bills. Now that is if the racer is purchasing a full system, Pro pegs,Heelplates, and Nerfs. The average on most products is around 500 - 700 depending on who your shopping with and if you have 2 quads or more it adds up fast. And also you have to take into consideration the amount of racing your doing and wear and tear on your poor little knees and ankles. The Footpeg design from Houser has really helped with the aches and pains of everyday riding. Not to mention the Tree Hugger Series does actually help the quad in those tight woods situation pivoting around trees and rocks and even other riders quads. So if you can raise the funds check them out im sure you wont be disappointed.Thanks

[Quad18star]

Nice looking nerfs and I'm sure they're very practical , but as mentioned that's a large expense to try and justify. I'm still amazed that ATV products are so darn expensive compared to the dirtbike scene. The markup is crazy.:ermm:

[Scro]

I could justify the price of them, as long as they hold up to the abuse. I've never had a set of nerf bars to hold their shape more than a couple weekends of riding. Just from an outside perspective, these look to be the strongest on the market right now.

Is the peg that bolts to the frame a tubular design like the AC propegs, or is it a gusseted design like the Roll Design pegs?

[304racing]

Hey man go to Houser Racing .com and look at the blow ups of the way the peg is made it will help. Houser makes them out of the same material they use to make there a-arms,and you race so you know im no lying when i say they are not like the construction off alot of nerfs, pegs, heelplates, that cant take a hit at all without bending the net tabs or bending the footpeg mount. The pics on there web site will help they truley made use believers after sommerset and snowshoe and alot of bad local races.Eric really uses them to there full potential and was a bit sceptical at first but now wont ride without them. hope this helped. Frank