Spark arrestor screen measurements

[Pabst_Powered]

hello, could anyone give me a measurement of their spark arrestor screens, the diameter of the whole piece, the screen diameter, and the depth of the screen itself. I just picked up a full LRD Pro4 series exhaust and it takes this type of screen, thank you

[dalejiw25]

Hey My FatBoy4 Measures 2-3/8" outside ring, 1-13/16" Screen dia., and a 1" domed screen. Looks exactly like the LRD one in the pic. If it will work for you, Order direct through Duncan Racing @ 1-866-379-7223, They're about $18. You will need your end cap or maybe a turn down to hold it in place though. DR has turn downs also for about $40(Don't know if they'll bolt up to the LRD though). Good Luck.

[sc400ex_rider]

Hi, did you buy it new or used? cause i have a brand new emblem for it.

[dalejiw25]

Hey, Which Emblem are you referring too, The emblem for the spark arrestor or the Fatboy ????

[Pabst_Powered]

Originally posted by dalejiw25
Hey My FatBoy4 Measures 2-3/8" outside ring, 1-13/16" Screen dia., and a 1" domed screen. Looks exactly like the LRD one in the pic. If it will work for you, Order direct through Duncan Racing @ 1-866-379-7223, They're about $18. You will need your end cap or maybe a turn down to hold it in place though. DR has turn downs also for about $40(Don't know if they'll bolt up to the LRD though). Good Luck. thanx, yeah I have the turn down and this sparky will work. thanx again, Travis

[Pabst_Powered]

duncan is out of stock, what about you guys with all these HMF's?

[sc400ex_rider]

I got this one
http://i140.photobucket.com/albums/r20/starcraftier1/Bmj4-wwmkKGrHqEOKi0EtkWgDLtkBLgC1LI.jpg