250r owners...

[tants]

come someone show me a pic or explain how the front 'stays' hold on the front plastic? i know the 'stays' are bolted to the upper shock mounts and there is a little hole on each end, but what goes threw the hole and into the hole of the front plastic to hold it on? my 250r didnt even have the 'stays' bolted on so i need to order the parts from service honda, and i was just wondering. pictures would be great

[tants]

im running racecuts and i probly dont have to you the mounts... just wondering if i ever run the full fronts

[Vtr_Racing]

If your talking about those wire things, there is a nut that holds them on to the top of the shock mounts. The other side of the "wire thing" has a rubber grommet and the fender just sits on top of it if I remember correctly. I cut my fenders and its been a while. Hope that helps.

[tants]

so it just rests on it? nothing goes threw the hole on the plastic??

they are good to use (no pics rt now)...the rubber cushoin is needed to keep then from from putting ahole in th plastic...
the cushions is installed at the other end from where they mounted to frame above shock mount area & goes under the plastic as a cushion against the plastic

the "wire things" are called "fenders stays"
part #'s for 86 /87 is
rt side ,..61111-hb-9-000
lt side ,...61112-hb-9-000
your welcome tants ...:devil

[nuttynewt]

Nothing goes through the grommet. 2-R's is right, they are just there to support your fenders and keep them from sagging. If you are running race cut plastic, I wouldn't think that you even need them.

[tants]

Originally posted by "2-R's Rider"
the "wire things" are called "fenders stays"
part #'s for 86 /87 is
rt side ,..61111-hb-9-000
lt side ,...61112-hb-9-000
your welcome tants ...:devil

i said stays... not wired things


thanks tho ;)

Originally posted by tants
i said stays... not wired things


thanks tho ;)
yup i know that,.... VTR,...said that ...;)