claysferrycycle
07-28-2010, 05:51 PM
Here are a bunch of parts I have left over from parting out my race quad:
-Freshly gusseted and powdercoated frame and subframe great condition never rode on after gusset and pc 600.00
-wire harness with all boxes and pro design kill switch 50.00
-Hipers with tireballs and tires front 4/1 offset maxxis razr2 tires single beadlock rears dual beadlock with gbc groundbuster 2s 1000.00
-Arsfx plus 1 stem with 1 1/8 clamp 175.00
-Precision stabilizer could use new link 300.00
-Flexx bars 200.00
-Rath monster peg nerfs less than 1 hour ride time 200.00
-ASV C5 pro model clutch assembly and brake lever 125.00
-Quadtech seat with a few very small holes at the back 100.00
-05 carb with HRC needle and airbox with pro flow adapter no toil filter and ehs racing lid 175.00
- Front brake system brand new pads and stainless lines 100.00
-RPM antifade locknut with rotor 75.00
-kickstarter 50.00
-HMF full system 150.00
-Complete head perfect condition 275.00
-Complete Transmission 200.00
-06 swingarm with brand new bearings 100.00
-05 swingarm 75.00
-Did X-ring gold chain and sprockets 1 hour ride time 40.00
-Stock axle 60.00
-Stock radiator 50.00
-Front spindles hubs and rotors 150.00
-Stock front shocks 175.00
-Stock rear shock 60.00
All parts are located in Jacksonville,Fl and do notinclude shipping. Pm if interested.
-Freshly gusseted and powdercoated frame and subframe great condition never rode on after gusset and pc 600.00
-wire harness with all boxes and pro design kill switch 50.00
-Hipers with tireballs and tires front 4/1 offset maxxis razr2 tires single beadlock rears dual beadlock with gbc groundbuster 2s 1000.00
-Arsfx plus 1 stem with 1 1/8 clamp 175.00
-Precision stabilizer could use new link 300.00
-Flexx bars 200.00
-Rath monster peg nerfs less than 1 hour ride time 200.00
-ASV C5 pro model clutch assembly and brake lever 125.00
-Quadtech seat with a few very small holes at the back 100.00
-05 carb with HRC needle and airbox with pro flow adapter no toil filter and ehs racing lid 175.00
- Front brake system brand new pads and stainless lines 100.00
-RPM antifade locknut with rotor 75.00
-kickstarter 50.00
-HMF full system 150.00
-Complete head perfect condition 275.00
-Complete Transmission 200.00
-06 swingarm with brand new bearings 100.00
-05 swingarm 75.00
-Did X-ring gold chain and sprockets 1 hour ride time 40.00
-Stock axle 60.00
-Stock radiator 50.00
-Front spindles hubs and rotors 150.00
-Stock front shocks 175.00
-Stock rear shock 60.00
All parts are located in Jacksonville,Fl and do notinclude shipping. Pm if interested.