how to cut fenders

[bigsho400]

what line do u cut stock front fenders and what should i use to cut them. i have a sawzall and high speed grinder w/compressor??

[Nausty]

if you do a search you should be able to find all the information

[Sparks425Ex]

Just make a like with Electrical Tape then cut it with a hack Saw. Then File and Sand Down the edges.


Fairly Simple actually.

[tants]

here


http://exriders.com/vbb/showthread.php?s=&threadid=33882&highlight=cut%2A+plastics

[NoWingNoPrayer]

Use the grinder. Sawzaws are not detailers at all! tape is a good idea.. i just used a marker a piece of carbon fiber wire( to make a perfect bend all around) and a ruler to make sure it was even.. after that i took the grinder to it:devil

[HiperEX]

i used a rotozip with a grinder adn make the markings with some electical tape but if its cold were u are the tap will not stick if your plastic is cold or the tape here is what mine looks like after i shaved them then i used a small gas torch to get teh edges smoothed out