Camaro1976
07-21-2010, 01:35 PM
http://www.suzukicentral.com/forums/attachments/images-other-media/5649d1245642883-new-akraix-graphics-10087897350_orig.jpeg
Going to be parting this beast out. Would like to set up a few deals for bigger parts before anything gets shipped out. If you see something in the pictures that I didn't list, make an offer on it. I also have a ton of stock parts as well as almost an entire parts engine.
Try and read through the entire list. I never realized how hard it would be to organize this but I made it as easy as possible for you.
Link to Pictures (http://s876.photobucket.com/albums/ab326/Z400Camaro1976/Z400%20Partout/)
Subframe = $25
Perfectly straight, modded to have removable grabbar. Could use paint
Plastics = $240 + shipping
Silver lakers, no cracks, have custom akraix graphics on them. These are in perfect shape
Powermadd Handguards = $50
Perfect shape, come with the mounts and the outside wraps. Also have all original mounts to fit a variety of quads
Wiring harness and custom battery box = $20
This is a complete harness and box good for a mx racer. Everything unnecessary is chopped out. Only things left in were the indicator lights. This harness doesn't use a key and is set up so that all you need is a tether to start/stop it. The box tucks up under the front plastics and houses everything, obviously you can't run a stock headlight with this. Reverse rev limiter is also removed.
Complete Intake Kit = $40
Huge K&N, almost can go all season without filter getting dirty haha. Intake is tapered from 4" to 3" then into a 400ex boot trimmed for a FCR. Must move battery to use.
Stock Radiator (05+ style) and fan= $50
G-force axle = $80
The chrome is chipped off. paint it or wrap it in electrical tape like josh haha
Rear shock w/ yellow spring and Elka linkage = $90
Oil tank = $30
Gas tank = $5
Woodward's Solid Stainless Steel Pivot Bolt = $50
Rear Hubs = $20
Going to be parting this beast out. Would like to set up a few deals for bigger parts before anything gets shipped out. If you see something in the pictures that I didn't list, make an offer on it. I also have a ton of stock parts as well as almost an entire parts engine.
Try and read through the entire list. I never realized how hard it would be to organize this but I made it as easy as possible for you.
Link to Pictures (http://s876.photobucket.com/albums/ab326/Z400Camaro1976/Z400%20Partout/)
Subframe = $25
Perfectly straight, modded to have removable grabbar. Could use paint
Plastics = $240 + shipping
Silver lakers, no cracks, have custom akraix graphics on them. These are in perfect shape
Powermadd Handguards = $50
Perfect shape, come with the mounts and the outside wraps. Also have all original mounts to fit a variety of quads
Wiring harness and custom battery box = $20
This is a complete harness and box good for a mx racer. Everything unnecessary is chopped out. Only things left in were the indicator lights. This harness doesn't use a key and is set up so that all you need is a tether to start/stop it. The box tucks up under the front plastics and houses everything, obviously you can't run a stock headlight with this. Reverse rev limiter is also removed.
Complete Intake Kit = $40
Huge K&N, almost can go all season without filter getting dirty haha. Intake is tapered from 4" to 3" then into a 400ex boot trimmed for a FCR. Must move battery to use.
Stock Radiator (05+ style) and fan= $50
G-force axle = $80
The chrome is chipped off. paint it or wrap it in electrical tape like josh haha
Rear shock w/ yellow spring and Elka linkage = $90
Oil tank = $30
Gas tank = $5
Woodward's Solid Stainless Steel Pivot Bolt = $50
Rear Hubs = $20