PDA

View Full Version : Used set of Works Performance shocks 9.75"



mbarryracing
07-20-2010, 12:25 PM
For sale:
Used set of Works Performance Shocks A-T Steeler Series (SRS) for a 50, 70, and 90 mini quad ATV.

Lengths are approximately 9.75 inch eye to eye.

These were from my daughters 2005 Bombardier DS90 2-stroke, she is moving up to a 250 this year and we sold her 90cc with the stock suspension.

Front Set is in good condition, charged with no leaks. Typical chips & dings on springs, etc from stones and mud, etc but nothing affecting fit, form, or function. Blue powdercoated Single Rate Springs (SRS) with retainer & c-clip adjustable spring pre-load to adjust the suspension sag for each rider weight or A-arm length.

Rear shock is in new condition, low hours. I had ordered this shock custom direct from Works Performance in 2009 for almost $300....
Blue powdercoated single rate spring (SRS) for 81-120 lb rider with threaded spring pre-load (TPL) to adjust the rear suspension sag for each rider weight or custom swing arm length.
Includes the aluminum spanner wrench and factory setup/tuning instructions seen in pictures.

http://www.worksperformance.com/html/atv.html


Trail ridden only, never raced. These are very plush, bolt-on high-performance high-quality gas charged shocks that far exceed the capabilities of the stock "pogo stick" shocks. Re-valvable and serviceable / rebuildable with replacement parts available thru Works Performance Products and the aftermarket.


Likely will fit some Bombardier Can Am DS50 DS70 DS90, Arctic Cat, Eton, Kasea, Dinli, Alpha Sports, Polaris Scrambler Sportsman Predator, and many other asian 50cc, 70cc, and 90cc mini quad ATV models with similar length shocks.

Will take $300 plus shipping for all three.

mbarryracing
07-20-2010, 12:26 PM
Picture of Rear Shock

mbarryracing
07-20-2010, 12:26 PM
Front pic

mbarryracing
07-20-2010, 12:28 PM
rear pic