steering stabilizer problem.. Need Advice!!

[450r07]

I have a streamline stick stabilizer, it works great but i am running a burgard steering stem and the clamp on my stabilizer that goes around the stem is to big. I really dont want to order another clamp so i just wrapped electricle tape around the stem until the clamp would fit tight. This is working for now but im afraid that it will slip off within the first 2 miles of a race. Does anybody else have this problem? And if so how do you fix it? Open to all ideas!!!!!

[4reeds]

Ive heard wrapping with sandpaper works,itll probably scuff it.

[Baileygunns]

As ghetto as it is I doubt it is going to slip.. If it does it will do it a little at a time not just spin to full lock in one turn....

Look up local machine shops and either
A: have them make a new clamp
or
B: make a shim.

Just my opinion... I wouldn't trust the tape for a Looong time (it will eventually break down) but I would trust it to get you by till you get a permanent solution. Just put on enough tape that it is TIGHT when you clamp it.

[Lquad71]

drill a hole through the clamp then thread it and put a set screw in. it should help.

[eastside 400]

spend the 20 bucks and get a clamp, call eastcoast ATV, they have cheap ones